84
PAW-VP•LDHW - Technical Manual – 2020-07
How to make Settings
9
9.2.3 Monitoring operations (Sensor info) ECOi
"DN"
Description
Remarks
Indoor unit intake temp. (TA)
°C
Indoor unit
Indoor unit heat exchanger temp. E1 (E1)
°C
—
Indoor unit heat exchanger temp. E3
°C
Discharge air temp. (BL)
°C
Discharge air temp. setting
°C
Indoor unit MOV pulse (MOV)
STEP
Discharge temp. (DISCH)
°C
Outdoor unit
High-pressure sensor temp.
°C
Heat exchanger gas (EXG)
°C
Heat exchanger liquid (EXL)
°C
Outdoor air temp. (TO)
°C
Inverter secondary current
A
Inverter primary current (L2 phase) (Three phase only)
A
MOV pulse 1 (MOV1)
STEP
—
—
Inverter actual operating frequency
Hz
Sub cooler (MOV4)
STEP
Inverter primary current (L1 phase)
A
Low-pressure sensor temp.
°C
Suction temp. (SCT)
°C
Inverter primary current (L3 phase) (Three phase only)
A
Temp. sensor at refrigerant gas outlet of dual-tube temp. (SCG)
°C
High-pressure
MPa
Low-pressure
MPa
i
Note
It takes about 10 seconds until outdoor unit data appears or changes on the display.