For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
34
Notes:
• If “Cable” or “Antenna” is selected and a CableCARD™ is not
inserted, Auto program will perform Scan All.
• If “Cable” is selected and a CableCARD™ is inserted, Auto
scan will not be available.
• Some channels with very weak signals may be locked into
memory. If desired, these channels can be deleted man u al ly
using the “Manual program setting”. (p. 34)
• “Auto program” must be done when you select the input
signal for the first time or whenever you change the antenna
configuration.
Press to select “ANT In”.
4
Press to select “Antenna” or
“Cable”.
Press to select “Mode”.
5
Press to select “All” or
“Analog”.
Press to start Scan.
Press to select “Start scan”.
6
7
After Auto program is complete, the unit will return
to Manual program mode. To place the channels
that were located by auto scan in memory, move the
cursor to “Apply” and press OK. (p. 34-36)
If OK is not pressed after selecting APPLY, the
channels will not be memorized.
Now scanning analog channel...
Progress
ANT In
◄
Cable
►
Mode All
Start scan
Auto program
ANT In Cable
Mode
◄
All
►
Start scan
Auto program
Use this procedure when changing setting of
receiving channels or changing the channel dis play.
Also, use to add or delete channels from channel list
manually.
Manual program setting
Press MENU to display the Main Menu screen.
Press to select “Setup” icon.
Press to display the Setup
menu.
Press to select “Manual”.
1
2
3
Press to enter the Manual
program screen.
Press to display the Program
channel menu.
Press to select “Program
channel”.
Note:
• If Lock (p. 50) has been set, you must enter your password to
display the Manual Program screen.
Picture
Audio
Timer
Lock
TVG / Photo
Setup
Menu
Auto
Manual
Signal meter
Program channel
CH scan All
Language
Clock
Program channel
Input labels
CC
Setup
Tuning channels (continued)
