Settings
POSITION menu
36 -
E
NGLISH
WSS
(Wide Screen Signalling) detects if a
PAL
/
625p (576p)/625i (576i) signal is input and that signal
has an identification signal, and switch the aspect ratio
to required setting automatically. You can switch the
system off manually.
If the 4 edges of an image is partly dropped, you can use
this function to adjust and project it properly.
Setting range: 0 to +10
OVER SCAN
is not available with
COMPUTER
signals.
If the projector is aligned non-perpendicularly to the
screen, or if the projection screen has an angled surface,
you can vertically correct keystone.
Setting range: -32 to 32
You can adjust
V - POSITION
,
H - POSITION
,
DOT
CLOCK
and
CLOCK PHASE
automatically when
connecting via
COMPUTER IN
. Press
ENTER
to adjust
these at the same time.
WSS
OVER SCAN
Enlarge
Shrink
KEYSTONE
Image
Operation
NOTE:
• You can correct the distortion ± 30 degrees from the
vertical plane. For a better quality image, installing the
projector with a minimum of distortion is recommended.
• Some distortion may be retained for the lens shift
adjustment.
• The distortion of the main menu screen is not
correctable.
• The result of the keystone correction will affect the
aspect ratio and the size of the image.
AUTO SETUP
