Options
ENGLISH -
45
Settings
Select [Options] from the Main Menu (see “How
to operate menu” on page 35) and then select
the item from the Sub Menu.
Auto Source
Set the automatic signal search function when power
on or the source of the signal being received is lost.
Press ▲▼ to select [Auto Source].
1 )
Press ►
to display the setting dialog box.
2 )
Press ◄► to switch [On]/[Off].
3 )
On
It will automatically search and
display the signal sources marked
in the [Input] when power on or the
source of the signal being received
is lost.
Off
When the source of the signal
being received is lost, it will not
search other sources.
Search and display order: [Computer 1]
z
[Computer 2]
[HDMI]
[Video]
[S-Video]
[Computer 1]
.
Input
Set the automatic search signal source for
[Auto
Source]
.
Press ▲▼ to select [Input].
1 )
Press ►
to display the setting dialog box.
2 )
The [Input] menu dialog box is displayed.
z
Press ▲▼ to select the input you want
3 )
to search and press ►
.
The input with a check mark will be able to be
z
searched when [Auto Source] is set to [On].
To remove the check mark, choose the desired
z
item and press ►.
Auto Power Off (Min)
Set the time to automatically turn off the projector
when there is no signal input.
Press ▲▼ to select [Auto Power Off
1 )
(Min)].
Press ►
to display the adjustment
2 )
dialog box.
Press ◄► to adjust off timer (min).
3 )
When this function is set to [0 (min)], it is
z
disable.
You can set the time in 5 minutes intervals and
z
the longest set time is 120 minutes.
Note
60 seconds before the auto power off, the countdown
z
screen will appear. During countdown, the screen will
disappear if there is signal input or operation to the
projector.
Lamp Settings
Displays and sets detail of the lamp settings.
Press ▲▼ to select [Lamp Settings].
1 )
Press ►
to display the setting dialog
2 )
box.
Lamp Hours Used (Normal)
J
Displays the used lamp hours under [Normal]
z
lamp power mode.
Lamp Hours Used (ECO)
J
Displays the used lamp hours under [ECO]
z
lamp power mode.
Lamp Life Reminder
J
Press ▲▼ to select [Lamp Life
1 )
Reminder].
Press ►
to display the setting dialog
2 )
box.
Press ◄► to switch [On]/[Off].
3 )
On
Displays the lamp warning message.
(
Æ
page 60)
Off
The warning lamp message will not
be displayed.
Options
