ENGLISH - 55
Chapter 4 Settings — [PICTURE] menu
[PICTURE] menu
Select [PICTURE] from the main menu, and select the item from the sub-menu.
Refer to “Navigating through the menu” (
x
page 51) for the operation of the menu screen.
r
f
After selecting the item, press
asqw
to adjust.
[PICTURE MODE]
You can switch to the desired picture mode suitable for the image source and the environment in which the projector is used.
1)
Press
as
to select [PICTURE MODE].
2)
Press
qw
or the <ENTER> button.
r
f
The
[PICTURE MODE]
individual adjustment screen is
displayed.
3)
Press
qw
to switch [PICTURE MODE].
r
f
The setting will change among [STANDARD], [CINEMA],
[NATURAL], [REC709], [DICOM SIM.], [DYNAMIC] and
[GRAPHIC] each time you press the button.
r
r
[PICTURE MODE]
[STANDARD]
The picture becomes suitable for moving images in general.
[CINEMA]
The picture becomes suitable for movie sources.
[NATURAL]
The picture is sRGB compliant.
[REC709]
*
The picture is REC709 compliant.
[DICOM SIM.]
*
The picture becomes similar to that of DICOM Part14 Grayscale Standard.
[DYNAMIC]
The light output is maximized for use in bright areas.
[GRAPHIC]
The picture becomes suitable for input to the personal computer.
*
Use the factory default for the settings other than [PICTURE MODE].
Note
r
f
The factory default picture mode is [GRAPHIC] for still image input signals and [STANDARD] for movie based input signals.
r
f
DICOM is an abbreviation for “Digital Imaging and Communication in Medicine” and is a standard for medical imaging devices. Although the
DICOM name is used, the projector is not a medical device, and should not be used for purposes such as diagnosis of display images.
[CONTRAST]
You can adjust the contrast of the colors.
1)
Press
as
to select [CONTRAST].
2)
Press
qw
or the <ENTER> button.
r
f
The
[CONTRAST]
individual adjustment screen is displayed.
3)
Press
qw
to adjust the level.
r
r
Operations and adjustment range
Operation
Adjustment
Range
Press
w
.
Brightens the screen and makes the color of image deeper.
-31 - +31
Press
q
.
Darkens the screen and makes the color of image lighter.
Attention
r
f
Adjust [BRIGHTNESS] first when you need to adjust the black level.
[BRIGHTNESS]
You can adjust the dark (black) part of the projected image.
1)
Press
as
to select [BRIGHTNESS].
2)
Press
qw
or the <ENTER> button.
r
f
The
[BRIGHTNESS]
individual adjustment screen is displayed.
