88 - ENGLISH
Chapter 4 Settings — [SIGNAL LIST] menu
To register the current settings to the list
1)
Press
qw
on the normal screen (when the
menu is not displayed).
r
f
The sub memory registration screen is displayed if the sub
memory is not registered. Proceed to Step
3)
.
r
f
A list of sub memories registered to the signal currently input is
displayed.
r
f
When [SUB MEMORY] is selected with [PROJECTOR SETUP]
→ [FUNCTION BUTTON] on the menu, the <FUNCTION>
button can be used instead of
qw
.
2)
Press
asqw
to select the sub memory
number to register in [SUB MEMORY LIST].
3)
Press the <ENTER> button.
r
f
The
[SIGNAL NAME CHANGE]
screen is displayed.
4)
Press
asqw
to select [OK], and press the
<ENTER> button.
r
f
To rename the registered data, follow the procedure in Steps
4)
and
5)
in “Renaming the registered data” (
x
page 86).
To switch to the sub memory list
1)
Press
qw
on the normal screen (when the
menu is not displayed).
r
f
A list of sub memories registered to the signal currently input is
displayed.
2)
Press
asqw
to select the signal to switch in
[SUB MEMORY LIST].
3)
Press the <ENTER> button.
r
f
This switches to the signal selected in Step
2)
.
To delete the sub memory data
1)
Press
qw
on the normal screen (when the
menu is not displayed).
r
f
The
[SUB MEMORY LIST]
screen is displayed.
2)
Press
asqw
to select the sub memory to
delete, and press the <DEFAULT> button.
r
f
The
[ENTRY SIGNAL DELETE]
screen is displayed.
r
f
To cancel the deletion, press the <MENU> button to return to
the
[SUB MEMORY LIST]
screen.
3)
Press the <ENTER> button.
r
f
The selected sub memory will be deleted.
