Chapter 4
Settings — [DISPLAY OPTION] menu
100 - ENGLISH
[AUTO]
Automatically sets the signal level.
[64-940]
Select when the HDMI terminal output of an external device (such as a blu-ray disc player) is
connected to the <DIGITAL LINK/LAN> terminal via a twisted-pair-cable transmitter.
[0-1023]
Select this when the DVI-D terminal output or HDMI terminal output of an external device (such as a
computer) is connected to the <DIGITAL LINK/LAN> terminal via a twisted-pair-cable transmitter.
Note
f
The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the
external device regarding the output of the external device.
[SDI IN]
(Only for PT-DZ870E)
Set to match the signal to input to the <SDI IN> terminal.
Setting [SIGNAL LEVEL]
Select the amplitude of the signal to input.
1) Press
as
to select [SDI IN].
2) Press the <ENTER> button.
f
The
[SDI IN]
screen is displayed.
3) Press
as
to select [SIGNAL LEVEL].
4) Press
qw
to switch the item.
[64-940]
Normally use this setting.
[4-1019]
Select when gray is displayed as black.
Setting [BIT DEPTH]
1) Press
as
to select [SDI IN].
2) Press the <ENTER> button.
f
The
[SDI IN]
screen is displayed.
3) Press
as
to select [BIT DEPTH].
4) Press
qw
to switch the item.
[AUTO]
Automatically select 12 bits or 10 bits.
[12-bit]
Fix to 12 bits.
[10-bit]
Fix to 10 bits.
Setting [3G-SDI MAPPING]
1) Press
as
to select [SDI IN].
2) Press the <ENTER> button.
f
The
[SDI IN]
screen is displayed.
3) Press
as
to select [3G-SDI MAPPING].
4) Press
qw
to switch the item.
[AUTO]
Automatically select level A or level B.
[LEVEL A]
Fix to level A.
[LEVEL B]
Fix to level B.
Note
f
Does not operate during SD-SDI or HD-SDI input.
