Chapter 4
Settings — [PROJECTOR SETUP] menu
110 - ENGLISH
Note
f
When [SINGLE], [LAMP1], or [LAMP2] is selected, if the lamp turns off or if the runtime exceeds 3 000 hours
*1
(when [LAMP POWER] is
set to [NORMAL]), the other lamp turns on. When [DUAL] is selected, if either lamp turns off or if the runtime exceeds 3 000 hours
*1
(when
[LAMP POWER] is set to [NORMAL]), only the other lamp remains on. However, if both lamps turn off or when operation times of both
lamps exceed 3 000 hours
*1
(when [LAMP POWER] is set to [NORMAL]), the projector turns into standby.
*1 1 000 hours when using the optional Replacement lamp unit (for portrait mode) (Model No.: ET-LAD120P (1 pc), ET-LAD120PW (2 pcs)).
f
The colors of the items indicate the status.
Green
Current setting
Yellow
Current setting (when there is a lamp that cannot turn on or failed to turn on)
Red
Lamp that has failed to turn on
White
Any other status
f
When the lamp is repeatedly used in a short-time cycle, the life of the lamp shortens.
[LAMP RELAY]
Switch the lamp to be turned on automatically by specifying the day of the week and time.
The degradation of the lamp due to continuous usage can be reduced by automatically switching the lamp to be turned on when using the
projector continuously for a week or more.
1) Press
as
to select [LAMP RELAY].
2) Press
qw
to switch the item.
[OFF]
Disables lamp relay.
[24H]
Switches the lamp daily.
[1WEEK]
Switches the lamp weekly.
f
When [24H] or [1WEEK] is selected, proceed to Step
3)
.
3) Press
as
to select [TIME].
4) Press the <ENTER> button.
f
Enters adjustment mode (the display is blinking).
5) Press
qw
to select “hour” or “minute”, and press
as
or the number (<0> - <9>) buttons to set a
time.
f
Selecting “hour” allows setting of only the hour in increments of one hour, and selecting “minute” allows setting of only the minute in
increments of one minute between 00 and 59.
6) Press the <ENTER> button.
f
The adjusted time is established.
f
When [1WEEK] is selected in Step
2)
, proceed to Step
7)
.
7) Press
as
to select [DAY OF THE WEEK].
8) Press
qw
to switch the item.
[SUNDAY]
Switches the lamp automatically on the set day of the week.
[MONDAY]
[TUESDAY]
[WEDNESDAY]
[THURSDAY]
[FRIDAY]
[SATURDAY]
Note
f
The [LAMP RELAY] function is enabled when [DUAL] or [SINGLE] is selected in [LAMP SELECT].
f
When [DUAL] is selected in [LAMP SELECT], only one lights for four hours from the specified time.
f
The operating time will be the local time. (
x
page 121)
