Chapter 4
Settings — [3D SETTINGS] menu
90 - ENGLISH
[3D SETTINGS] menu
On the menu screen, select [3D SETTINGS] from the main menu, and select an item from the
sub-menu.
Refer to “Navigating through the menu” (
x
page 65) for the operation of the menu screen.
f
After selecting the item, press
asqw
to set.
[3D SYSTEM SETTING]
Set a picture display method for use during 3D signal input as necessary for the 3D system in use.
1) Press
as
to select [3D SYSTEM SETTING].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[SINGLE]
During 3D signal input, images for the right eye and images for the left eye are alternately displayed
with the frame sequential system.
[DUAL (LEFT)]
Only images for the left eye are displayed during 3D signal input.
[DUAL (RIGHT)]
Only images for the right eye are displayed during 3D signal input.
Note
f
When 2D images are input, 2D images are displayed regardless of [3D SYSTEM SETTING] settings.
[DLP Link]
You can set this function when using the 3D eyewear that supports DLP Link.
1) Press
as
to select [DLP Link].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[ON]
Enables the DLP Link function.
[OFF]
Disables the DLP Link function.
Note
f
If [DLP Link] is set to [ON], [DYNAMIC IRIS] is fixed to [OFF] while 3D images are displayed.
[3D SYNC SETTING]
Set the way in which the <3D SYNC 1 IN/OUT> terminal and the <3D SYNC 2 OUT> terminal will be used.
Attention
f
Before connecting external devices to the <3D SYNC 1 IN/OUT> terminal and the <3D SYNC 2 OUT> terminal using cables, complete the
[3D SYNC MODE] setting and confirm that the external devices to be connected are turned off.
f
Changing [3D SYNC MODE] while the cables are connected may result in malfunctions of the projector or the connected external devices.
1) Press
as
to select [3D SYNC SETTING].
2) Press the <ENTER> button.
f
The precaution message related to [3D SYNC SETTING] is displayed.
3) Press the <ENTER> button.
f
The
[3D SYNC SETTING]
screen is displayed.
4) Press
as
to select [3D SYNC MODE].
