S
P
E
C
F
I
L
E
PT-
DZ110X
E
3-Chip DLP
™
Projector
As of May 2011
SFD10M004-2
2 / 1 9
Specifications
Main unit
Power supply
Power consumption
DLP™ chip
Panel size
Display method
Pixels
Lens
Lamp
Screen size
Brightness*
2
Centre-to-corner uniformity*
2
Contrast*
2
Resolution
Scanning frequency
SDI
HDMI/DVI-D/RGB
YP
B
P
R
(YC
B
C
R
)
Video/S-Video
Optical axis shift
Vertical
Horizontal
Keystone correction range
Installation
220–240 V AC, 5.0 A, 50/60 Hz
980 W (1,030 VA at 240 V) (0.3 W with standby mode set to eco.*
1
8 W with standby mode set to normal. Both with fan stopped.)
24.4 mm (0.96 inches) diagonal (16:10 aspect ratio)
DLP™ chip × 3 (R, G, B), DLP™ projection system
2,304,000 (1,920 × 1,200) × 3, total of 6,912,000 pixels
Optional powered zoom/focus lenses
355 W UHM lamps (× 2) (dual lamp system)
1.78–15.24 m (70 – 600 inches) (1.78–7.62 m (70 – 300 inches) with the
ET-D75LE5), 16:10 aspect ratio
10,600 lumens (dual lamp, high mode)
90%
10,000:1 (full on/full off, in dynamic iris 3 mode)
1,920 × 1,200 pixels (Input signals that exceed this resolution will be
converted to 1,920 × 1,200 pixels.)
SD-SDI signal: SMPTE 259M compliant: 480i, 576i
Single-link HD-SDI signal: SMPTE 292M compliant:
720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p,
1080/24p, 1080/24sF, 1080/30p
Horizontal: 15 kHz –100 kHz, vertical: 24 Hz – 120 Hz,
dot clock: 162 MHz or lower
480i (525i):
f
H
15.75 kHz; f
V
60 Hz,
576i (625i):
f
H
15.63 kHz; f
V
50 Hz,
480p (525p):
f
H
31.50 kHz; f
V
60 Hz,
576p (625p):
f
H
31.25 kHz; f
V
50 Hz,
720 (750)/60p:
f
H
45.00 kHz; f
V
60 Hz,
720 (750)/50p:
f
H
37.50 kHz; f
V
50 Hz,
1035/60i:
f
H
33.75 kHz; f
V
60 Hz,
1080 (1125)/60i: f
H
33.75 kHz; f
V
60 Hz,
1080 (1125)/50i: f
H
28.13 kHz; f
V
50 Hz,
1080/25p:
f
H
28.13 kHz; f
V
25 Hz,
1080/24p:
f
H
27.00 kHz; f
V
24 Hz,
1080/24sF:
f
H
27.00 kHz; f
V
48 Hz,
1080/30p:
f
H
33.75 kHz; f
V
30 Hz,
1080/60p:
f
H
67.50 kHz; f
V
60 Hz,
1080/50p:
f
H
56.25 kHz; f
V
50 Hz
f
H
: 15.75 kHz, f
V
: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60]
f
H
: 15.63 kHz, f
V
: 50 Hz [PAL/PAL-N/SECAM]
±55% (±44% with the ET-D75LE6) from centre of screen, powered
±20% (±15% with the ET-D75LE6) from centre of screen, powered
Vertical: ±40° (±22° with the ET-D75LE5, ±28° with the ET-D75LE6)
When using only the KEYSTONE correction of the Geometric
Adjustment function: Vertical ±40°, horizontal ±15°
(vertical ±22° and horizontal ±15° with the ET-D75LE5,
vertical ±28° and horizontal ±10° with the ET-D75LE6)
When using both the KEYSTONE and CURVED corrections of the
Geometric Adjustment function: Vertical ±5°, horizontal ±5°
(vertical ±10° and horizontal ±10° with the ET-D75LE3,
vertical ±10° and horizontal ±15° with the ET-D75LE4/D75LE8)
Ceiling/floor, front/rear
