Enhanced Installa-
tion Flexibility
Flexible Installation
The wide adjustment
range of the powered
horizontal/vertical lens
shift function assures
virtually distortion-free
images and adds con-
venience and versatil-
ity. It lets you easily make adjustments with the
remote control. The unit can also be rotated 360°
vertically. This means you can install it at any
angle you want, to accommodate different instal-
lation conditions. The lens-centred design also
contributes to easy installation.
Geometric Adjustment
*
7
for Specially
Shaped Screens
This function adjusts the image for projection
onto spherical, cylindrical and other specially
shaped screens. You can make the adjustment
easily using just the remote control, with no exter-
nal equipment needed. Used together with the
multi-screen support system, Geometric Adjust-
ment expands your application possibilities, letting
you create a wide range of image effects for digit-
al signage, concerts, performances and other spe-
cial events.
Multi-Screen Support System
Seamlessly Connects Multiple Screens
•
Edge Blending
The edges of adjacent screens can be blended
and their luminance controlled.
•
Color Matching
This function corrects for slight variations in the
colour reproduction range of individual projec-
tors. The PC software assures easy, accurate
control.
•
Multi-Screen Processor
The PT-DZ110X Series can project large, multi-
screen images without any additional equip-
ment. Up to 100 units (10 × 10) can be edge-
blended at a time.
Multi Projector Monitoring & Control
Software Ver. 2
Panasonic’s original freeware “Multi Projector
Monitoring & Control Software Ver. 2” allows the
user to control and monitor multiple projectors at
the same time over a wired LAN. When a problem
occurs, an alarm message is sent to the monitor-
ing/controlling PC.
Web Browser Control
The PT-DZ110X Series can be easily operated
remotely over a LAN network, because it is all
done using the computer’s familiar web browser.
Furthermore, the projector sends an e-mail mes-
sage to notify the operator when an error has
occurred, or a lamp needs to be replaced.
PJLink™ Compatibility
The LAN terminals support PJLink™ class 1 con-
nection. Control with the same specifications is
also possible when used in a multi-projector sys-
tem with projectors of another brand.
A Wide Selection of Lenses
(optional)
Choose from a wide lineup of lenses for your sys-
tem, including short-throw, long-throw zoom and
fixed-throw lenses for rear projection use. The
additional lenses make it easy to adapt your pro-
jector to the installation site. The lenses attach
and detach with one-touch ease.
Multiple Terminals with HD-SDI
Compatibility
*
8
The PT-DZ110X Series has an array of terminals,
including a DVI-D (HDCP compliant), to support a
broad range of projection needs. Using the serial
terminal (RS-232C), it is possible to connect and
operate AMX and Crestron control systems with
ease. In addition, the PT-DZ110XE and
PT-DS100XE accommodate the HD/SD-SDI input
signals that are widely used in broadcasting.
Direct Power Off
The cooling fan continues to operate even when
the main power switch is turned off after projec-
tion is finished. This also allows the power to be
turned off by directly switching off the room’s
main breaker for systems, such as ceiling mount-
ed systems, where the main power switch cannot
be reached.
Scheduling Function
Scheduled operation is possible using the built-in
timer function, without having to use a PC and
software. For example, when using the projector
for digital signage in a store, it can be set to
operate with two lamps in the daytime and one
lamp at night.
Without edge blending
With edge blending
Overlapping image edges
PT-DZ110X Series
Source
Colour matching
Edge blending
PC
PC
PC
PC
PC
remote control
Internet
LAN
LAN
PT-DZ110X
Series
360°
Time
Brightness
(A)
(B)
Image from the
projector 1
Image from the
projector 2
Brightness
fluctuations occur.
At the time when the projectors are installed
(A)
■
Conventional Projector
After a certain time has passed
(B)
Time
Brightness
(A´ )
(B´ )
Images from the
projector 1 and 2
Preset
brightness
At the time when the projectors are installed
(A´)
■
Multi-Unit Brightness Control “ON”
After a certain time has passed
(B´)
Projector 1
Projector 2
Projector 1
Projector 2
Projector 1
Projector 2
Projector 1
Projector 2
Multi-Unit Brightness Control
This function automatically corrects the brightness
fluctuations that occur over time in the individual
projectors of a multi-screen system. A maximum
of eight projectors can be controlled by connecting
each other via a hub, and this can be increased
to a maximum of 2,048 projectors by using “Multi
Projector Monitoring & Control Software Ver. 2”.
NOTES
*7
Featured on the PT-DZ110XE and PT-DS100XE
only.
*8
Featured on the PT-DZ110XE and
PT-DS100XE only.
3
