Setting
70
- ENGLISH
Settings
Filter counter
This function is used to set the frequency of cleaning
or replacing the filter unit.
Press ▲▼ to select [Filter counter].
1 )
Press ► or the <ENTER> button to
2 )
access the submenu items.
Filter counter
J
Show the total accumulated time of the filter use timer
setting.
Filter counter remaining
J
The remaining time for the filter counter is displayed
in units of 10%.
This is displayed in red when the remaining time is 10%.
z
Filter counter timer
J
To set a timer. When the projector reaches the
selected time the filter warning icon appears on the
screen.
Press ▲▼ to select [Filter counter
1 )
timer] and then press the <ENTER>
button.
Press ▲▼ to set the timer.
2 )
Select from [Off/1000 H/2000 H/3000 H/
z
4000 H/6000 H/8000 H/9000 H/12000 H]
depending on the use environment.
The situation which different icons appear as
z
below shown:
When the remaining time is less
than
10%
.
When the remaining time is 0, the
filter replacement is necessary.
When the projector reaches a time
set by user in the timer setting.
Attention
[Filter counter remaining] disappears,
z
will be
displayed.
appeared about 10 hours later, and
powered on the projector about 3 minutes later, the
projector will power off automatically and enter the
standby mode in order to protect the inner parts of the
projector. When
is displayed, please clean or replace
the air filter units as soon as possible and then reset the
[Filter counter].
Filter counter reset
J
After cleaning or replacing the filter unit, be sure to
reset the timer.
Press ▲▼ to select [Filter counter
1 )
reset].
Press the <ENTER> button.
2 )
[Filter counter Reset?] appears. Select [Yes]
z
to continue. Another confirmation dialog
box appears, select [Yes] to reset the [Filter
counter].
Test pattern
Results of adjustment of the position , size and other
factors are not reflected in test patterns. Ensure the
input signal is displayed before performing various
kinds of setting.
Press ▲▼ to select [Test pattern].
1 )
Press ► or the <ENTER> button to
2 )
access the submenu items.
Press ▲▼ to go backwards and
3 )
forwards between test patterns as
below.
[Color], [Gradation 1], [Gradation 2],
z
[Gradation 3], [Gradation 4], [All white], [All
black] and [Cross].
Note
Even while the test pattern is displayed, the zoom,
z
focus, lens shift, shutter, and power off functions
take priority.
Factory default
This function returns all setting values except for [PIN
code lock], [Logo PIN code lock] and [Filter counter]
to the factory default settings.
Press ▲▼ to select [Factory default].
1 )
Press the <ENTER> button.
2 )
[Return to Factory default?] appears. Select
z
[Yes] to continue. Another confirmation dialog
box appears, select [Yes] to return to [Factory
default].
