- 72 -
Note
f
When the link to a backup file is clicked, [Already selected] is displayed. Even though the backup files are not saved, they will be displayed
while being clicked. Therefore, make sure to save all the backup files.
f
Backup data contains all information regarding the relevant schedule such as contents registered in the timetable and system setting
information.
f
Backup files are saved in “tar” format.
f
Acquisition of backups of schedules are supported only in Windows computers or Mac.
f
By uploading the obtained backup data to other projectors equipped with the Content Manager, you can play back the same content in the
same schedule.
Uploading a schedule
Upload a backed up schedule from the client computer (only Windows computer/Mac are supported) to the
projector.
1
Click the [Schedule] menu on the top menu screen.
f
The schedule screen is displayed.
2
Click .
f
The schedule setting screen is displayed.
3
Click the [Data management] tab.
f
The [Data management] page is displayed.
4
Click the [Add] button to upload file.
f
The file selection screen is displayed.
5
Select a backup file to upload, and click the [Open] button.
f
The file name is displayed in the upload data list.
f
Go back to Step 4 to continue to add another backup file, or go to Step 6 to cancel upload of a file, and then
when you finish adding all backup files necessary to upload, proceed to Step 8.
6
If there is a file you want to cancel upload, click .
f
The mode changes to deletion mode.
7
Select a file you want to cancel upload, click the [Delete] button.
f
You can select multiple files.
8
Click the [Upload] button.
f
The target schedule to upload is registered in the SD card.
Note
f
When the upload destination SD card contains the same day of the week schedule, or the same date schedule, the schedule is overwritten
with the uploaded schedule.
f
Backup files are saved in “tar” format.
f
If the size of the original backup data is overlarge, the backup file can be divided into several files. Make sure to add all the relevant files
before uploading.
