Chapter 5
Operations — Web control function
112 - ENGLISH
3 [FRAME GRADATION]
Sets the gradation of the outer periphery of the projected image.
4 [SPOT LIGHT1] to [SPOT LIGHT3]
Switches on/off each spotlight.
5 [Back] button
Returns to the previous screen.
Note
f
For details of settings, refer to the [LIGHTING] menu
→
[PATTERN] of the projector. (
x
page 59)
[Network config] page
Click [Detailed set up]
→
[Network config].
1) Click [Network config].
f
The
[CAUTION!]
screen is displayed.
2) Select an item for which you want to change the setting, and click the [Next] button.
f
The current settings are displayed.
3) Click the [Change] button.
f
The setting change screen is displayed.
Connecting with wired LAN
6
1
2
3
4
5
1 [DHCP ON], [DHCP OFF]
To enable the DHCP client function, set [DHCP ON].
2 [IP ADDRESS]
Enter the IP address when not using a DHCP server.
3 [SUBNET MASK]
Enter the subnet mask when not using a DHCP server.
4 [DEFAULT GATEWAY]
Enter the default gateway address when not using a DHCP
server.
5 [DNS1], [DNS2]
Enter the primary DNS/secondary DNS server address when
you do not use a DHCP server.
Available characters: Numbers (0 - 9), period (.)
(Example: 192.168.0.253)
6 [Back] button, [Next] button
Click the [Back] button to return to the previous screen. Click
the [Next] button to display a screen to confirm the settings.
Click the [Submit] button to update the settings.
Note
f
When you use the “Forward” or “Back” functions of your browser, a warning message “Page has Expired” may appear. In that case, click
[Network config] again as the subsequent operations will not be guaranteed.
f
Changing LAN settings while connected to the LAN may cause the connection to cut out.