Chapter 3
Basic Operations — Using SD cards
46 - ENGLISH
Using SD cards
The SD card slot of the projector supports the SD memory card and the SDHC memory card.
Notes on use
Observe following.
f
Do not disassemble or modify.
f
Do not apply strong shock, bend, drop, get wet, etc.
f
Do not touch the metal contacts with your hands or metal.
f
Do not peel off the affixed label or affix new label or seal.
f
Do not leave in a place that will become hot (inside a car, under direct sunlight, etc.).
f
Do not leave in a place with high humidity or dust.
f
Do not leave in a place with extreme temperature difference. Condensation may occur.
f
Do not leave in a place where static electricity or electromagnetic radiation is generated.
f
Store SD card in an appropriate manner, and keep it away from small children.
Data protection
f
To prevent losing important data, set the write protect switch on the SD card to “LOCK” position.
Turn off the write protect switch when saving or editing a file.
Write protect switch
f
Use a felt-tip pen (oil-based) when writing a character in the memo space of the label. Do not use pencil or
ballpoint pen. The card may get damaged or the data may be destroyed.
f
Manage the contents in the SD card under your responsibility. It is recommended to take a backup of important
data on other disc, etc.
f
Panasonic assumes no responsibility for loss of data recorded by yourself, or any other direct or indirect
damage.
f
It is recommended to physically destroy the card with a hammer, etc., when discarding.
Cards that can be used with the projector
SD memory card (2 GB)
(Including the miniSD memory card and the microSD memory card)
SDHC memory card (4 GB, 8 GB, 16 GB, 32 GB)
(Including the miniSDHC memory card and the microSDHC memory card)
Note
f
Commercially available SD card is supported.
f
Use the SD card with high data transfer speed. If the data transfer speed is slow, movie or music recorded in the SD card may not be played
back properly or it may take time to display a still image. (Speed class: Class 10 recommended)
f
Only the cards formatted in FAT16 or FAT32 can be used.
