Chapter 4
Settings — [SETUP] menu
74 - ENGLISH
4) Press
as
to select an item to initialize.
[ALL USER DATA]
Returns all setting items including [SIGNAGE], [NETWORK], and [E-mail set up] to the factory default
settings.
The projector enters the standby mode to reflect the setting values.
[NETWORK/E-MAIL]
Returns [SIGNAGE], [NETWORK], and [E-mail set up] to the factory default settings.
5) Press the <ENTER> button.
6) When the confirmation screen is displayed, press
qw
to select [OK], and press the <ENTER> button.
f
[PROGRESS]
is displayed while initialization is being performed.
Note
f
When [ALL USER DATA] of [INITIALIZE] is executed, turn the circuit breaker off and on, or disconnect and connect the plug of the power
cord to the outlet, and then turn on the projector.
[SERVICE PASSWORD]
This function is used by a service person.
