Chapter 4
Settings — [NETWORK] menu
84 - ENGLISH
[SSID]
Enter the same string as the SSID registered to the access point.
[AUTHENTICATION]
Select the user authentication method used in the network to which the projector is connected.
[OPEN]
Select this item when the authentication method of the access point
is Open System.
[SHARED]
Select this item when the authentication method of the access point
is Shared Key.
[WPA-PSK]
Select this item when the authentication method of the access point
is WPA-PSK.
[WPA2-PSK]
Select this item when the authentication method of the access point
is WPA2-PSK.
[WPA-EAP/WPA2-EAP]
Select this item when the authentication method of the access point
is WPA-EAP/WPA2-EAP.
[WPA-EAP]
Select this item when the authentication method of the access point
is WPA-EAP.
[WPA2-EAP]
Select this item when the authentication method of the access point
is WPA2-EAP.
[ENCRYPTION]
Select the encryption method used for the communication between the projector and the network.
[NONE]
Select this item not to use encryption.
It can be selected only when [AUTHENTICATION] is set to [OPEN]
or [SHARED].
[WEP]
Select this item when the encryption method is WEP. It can be
selected only when [AUTHENTICATION] is set to [OPEN] or
[SHARED].
[TKIP]
Select this item when the encryption method is TKIP.
It can be selected only when [AUTHENTICATION] is set to [WPA-
PSK], [WPA2-PSK], [WPA-EAP], or [WPA2-EAP].
[AES]
Select this item when you use AES for the encryption method.
It can be selected only when [AUTHENTICATION] is set to [WPA-
PSK], [WPA2-PSK], [WPA-EAP], or [WPA2-EAP].
[DEFAULT KEY]
Set a number from 1 to 4 for the default key.
It can be selected only when [AUTHENTICATION] is set to [OPEN] or [SHARED], and the encryption
method is [WEP].
[KEY1] - [KEY4]
Set WEP key to the key number selected in [DEFAULT KEY].
It can be selected only when [AUTHENTICATION] is set to [OPEN] or [SHARED], and the encryption
method is [WEP].
You can set a 64-bit or 128-bit WEP key. Enter five single-byte alphanumeric characters (10 digits for
hexadecimal) for 64-bit, or enter 13 single-byte alphanumeric characters (26 digits for hexadecimal)
for 128-bit.
[KEY]
Set the key.
It can be selected when [AUTHENTICATION] is set to [WPA-PSK] or [WPA2-PSK].
Enter 8 to 63 alphanumeric characters or 64-digit hexadecimal.
[EAP]
Select the EAP set for RADIUS server.
It can be selected when [AUTHENTICATION] is set to [WPA-EAP/WPA2-EAP], [WPA-EAP], or
[WPA2-EAP]. The types of EAP that can be selected are as follows.
[PEAP(MS-CHAPv2)], [PEAP(GTC)], [EAP-TTLS(MD5)], [EAP-TTLS(MS-CHAPv2)], [EAP-FAST(MS-
CHAPv2)], [EAP-FAST(GTC)]
[USER NAME]
Enter the user name to be used for authentication in single-byte alphanumeric characters (space not
included, 64 characters at the maximum).
It can be selected when [AUTHENTICATION] is set to [WPA-EAP/WPA2-EAP], [WPA-EAP], or
[WPA2-EAP].
[PASSWORD]
Enter the password to be used for authentication in single-byte alphanumeric characters (64
characters at the maximum).
It can be selected when [AUTHENTICATION] is set to [WPA-EAP/WPA2-EAP], [WPA-EAP], or
[WPA2-EAP].
Note
f
If the string of SSID exceeds 16 characters, the SSID is displayed in two lines.
7) Press
as
to select [NEXT], and press the <ENTER> button.
f
The
[Art-Net (WIRELESS LAN)]
screen (3/3) is displayed.
f
Press
as
to select [RETURN] and then press the <ENTER> button to return to the
[Art-Net (WIRELESS
LAN)]
screen (2/3).
8) Press
as
to select [DEVICE IP ADDRESS].
