Chapter 3
Basic Operations — Turning on/off the projector
ENGLISH - 49
Note
f
The above initial setting screen is the one displayed when the projector is turned on for the first time after purchase. When [ALL USER
DATA] is executed from the [SETUP] menu
→
[INITIALIZE], the [STANDBY MODE] setting before the execution is displayed.
Initial setting (time zone)
Set [TIME ZONE] according to the country or region where the projector is used.
Once the initial setting is completed, setting can be changed from the [SETUP] menu
→
[DATE AND TIME].
The current settings are displayed in the [LOCAL DATE] and the [LOCAL TIME]. If a change is necessary, set with
the [SETUP] menu
→
[DATE AND TIME] after completing the initial setting.
1) Press
qw
on the remote control to switch the setting.
4/4
◀
▶
Please set up a time zone according to
the area of your country or region.
INITIAL SETTING
TIME ZONE
2014/01/01
+09:00
LOCAL DATE
00:00:00
LOCAL TIME
CHANGE
SET
ENTER
2) Press the <ENTER> button on the remote control.
f
Confirm the setting value and complete the initial setting.
Note
f
In the factory default setting, the time zone of the projector is set to +09:00 (Japan and Korean Standard Time). Change the time zone
according to the region where you use the projector.
