ENGLISH - 15
r
Cautions when setting the projectors
f
Do not stack the projectors.
f
Do not use the projector supporting it by the top.
f
Do not block the ventilation ports (intake and exhaust) of the projector.
f
Avoid heating and cooling air from the air conditioning system directly blow to the ventilation ports (intake and exhaust) of
the projector.
f
Do not install the projector in a confined space.
When placing the projector in a confined space, a ventilation and/or air conditioning system is required. Exhaust heat may
accumulate when the ventilation is not enough, triggering the protection circuit of the projector.
Security
Take safety measures against following incidents.
f
Personal information being leaked via this product.
f
Unauthorized operation of this product by a malicious third party.
f
Interfering or stopping of this product by a malicious third party.
Security instruction (
Æ
pages 66, 88)
f
Make your password as difficult to guess as possible.
f
Change your password periodically.
f
Panasonic or its affiliate company never inquires a password directly to a customer. Do not tell your password in case you
receive such an inquiry.
f
The connecting network must be secured by firewall or others.
f
Set a password for web control and restrict the users who can log in
.
Cautions on use
r
To get a good picture quality
f
Draw curtains or blinds over windows and turn off any lights near the screen to prevent outside light or light from indoor
lamps from shining onto the screen.
f
Depending on where the projector is used, heated air from an exhaust port or warm or cold air from an air conditioner can
cause a shimmering effect on screen.
Avoid using in locations where exhaust or streams of air from projector, other devices and air conditioners flow between the
projector and the screen.
f
The lens of projector is affected by the heat from the luminous source. Because of this, the focusing may not be stable right
after the power is turned on. Focusing is stabled after projecting image for 30 minutes and longer.
r
Do not touch the surface of the projector lens with your bare hand.
If the surface of the lens becomes dirty from fingerprints or anything else, this will be magnified and projected onto the screen.
over 500 mm
(19-11/16")
over 1 000 mm
(39-3/8")
over 500 mm
(19-11/16")
over 200 mm
(7-7/8")
Chapter 1 Preparation - Precautions for use
