74 - ENGLISH
[Info.] menu
On the menu screen, select [Info.] from the main menu.
Refer to “Navigating through the menu” (
x
page 45) for the operation of the menu screen.
[Info.]
Display the status of the projector.
1) Press
as
to select [Info.].
f
The [Info.] screen is displayed.
f
You can also press the <INFO.> button on the remote control. (
x
page 40)
[Input]
The selected input source and the system are displayed.
[H-sync freq.]
The horizontal frequency of the input signal is displayed in kHz. [- - - - ] is displayed when no
signal is detected.
[V-sync freq.]
The vertical frequency of the input signal is displayed in Hz. [- - - -] is displayed when no signal
is detected.
[Lamp status]
The setting status of [Lamp control] is displayed.
[Lamp counter]
The usage time of the lamp is displayed. (Displays the converted runtime when [ (Eco 1)] is
using.)
[Power management]
The setting status of [Power management] is displayed.
[Image mode]
The setting status of [Image mode] is displayed.
[S/N]
The serial number of the projector is displayed. The serial number is used to service the
projector.
Chapter 4 Settings - [Info.] menu
