PROJECTOR SETUP menu
Settings
44 -
E
NGLISH
TEST PATTERN
You can use the 7 different test patterns to adjust
the focus of the image. Press the
ENTER
button to
display the test pattern.
Change
pattern
Change
pattern
Press the
MENU
or
RETURN
button to return to the
PROJECTOR SETUP
menu, or press repeatedly to
escape the menu mode.
5HPDUNV
The initial screen is an all white pattern. Only when
z
TEST PATTERN
is assigned to the
)81&7,21
button, the lattice pattern will display in the initial
screen.
INITIALIZE ALL
You can reset all of the customised settings in the
MENU
to the factory defaults.
If the
z
ENTER
button is pressed in the
INITIALIZE
ALL
menu,
INITIALIZE ALL
will display. Select
OK
and press the
ENTER
button,
NOW INITIALIZING...
is displayed. Then,
POWER
2))
is displayed.
Select
OK
and turn off the power according to the
instruction. (All other buttons are deactivated.)
The
z
INITIAL SETTING
menu screen will display
when the power is connected.
(
¨
page 13)
5HPDUNV
The usage time of the projector, lamp runtime and
z
the
NETWORK
settings are not initialised.
When
z
PASSWORD
in
SECURITY
menu is
activated, be sure to enter the correct password
when initialised.
After
z
INITIALIZE ALL
operation is completed, the
password is reset to the factory default setting and
PASSWORD
setting is turned
2))
.
