Image adjust
ENGLISH -
45
Settings
Noise reduction
Press ▲▼ to select [Noise reduction].
1 )
Press the <SELECT> button to display
2 )
the adjustment dialog box.
Press ◄► to select the desired item.
3 )
Off
Disabled
L1
Lower reduction
L2
Higher reduction
Noise interference on the screen can be
z
reduced. Select one of the above options to get
smoother images.
[Noise reduction] cannot be selected when
z
[480p], [576p], [720p], [1035i] or [1080i] is
selected.
Note
When input video signal to the projector, [Noise
z
reduction] will become available.
Progressive
Press ▲▼ to select [Progressive].
1 )
Press the <SELECT> button to display
2 )
the dialog box.
Press ◄► to select the desired item.
3 )
An interlaced video signal can be displayed in
z
progressive mode. Select one of the following
options.
Progressive cannot be selected when [480p],
z
[576p], [720p], [1035i] or [1080i] is selected.
Off
Disabled
L1
For an active picture
L2
For a still picture
Film
For watching a film
Note
When input video signal to the projector, [Progressive]
z
will become available.
Reset
To reset the adjusted data, all adjustments will return
to their previous figures.
Press ▲▼ to select [Reset].
1 )
Press the <SELECT> button.
2 )
A confirmation box appears and then select [Yes].
z
Store
Press ▲▼ to select [Store].
1 )
Press ► or the <SELECT> button.
2 )
Press ▲▼ to select one from Image 1
3 )
to 4 and press the SELECT button.
A confirmation box appears and then select [Yes].
z
