Chapter 4
Settings — [PROJECTOR SETUP] menu
ENGLISH - 127
[SIGNAL INFORMATION]
[INPUT]
Displays the input terminal used for the projected image.
[SIGNAL FORMAT]
Displays the format of the input signal.
[SIGNAL FREQUENCY]
Displays the frequency of the input signal.
[SYNC.STATE]
Displays the sync polarity of the input signal.
[V.SYNC WIDTH]
Displays the vertical sync signal pulse width of the input signal.
[SCAN TYPE]
Displays the scan type of the input signal.
[TOTAL DOTS]
Displays the total dot count of the input signal.
[DISPLAY DOTS]
Displays the number of input signal display dots.
[TOTAL LINES]
Displays the total line count of the input signal.
[DISPLAY LINES]
Displays the number of input signal display lines.
[SAMPLING]
Displays the sampling information of the input signal.
[SIGNAL LEVEL]
Displays the signal level of the input signal.
*1 The temperature status is indicated with text color (green/yellow/red) and bar scale. Use the projector within the range that the indication is
green.
Note
f
E-mail containing the status can be sent to the E-mail address (up to two addresses) set in “[E-mail set up] page” (
x
page 171) by
pressing the <ENTER> button while the
[STATUS]
screen is displayed.
f
There may be items that are displayed and items that are not displayed in [SIGNAL INFORMATION] depending on the setting or the input
signal.
f
If any abnormality has occurred on the projector, press the <DEFAULT> button while the
[STATUS]
screen is displayed to display the detail
screen of the error information.
f
For details on the contents displayed in [SELF TEST], refer to “[SELF TEST] display” (
x
page 207).
[DATA CLONING]
Operate the data cloning function. The setting and adjustment values of one projector can be copied to multiple
projectors via LAN or using the USB memory.
r
Data that cannot be copied
Following settings can not be copied. Set these in each projector.
f
The [PROJECTOR SETUP] menu
→
[PROJECTOR ID]
f
The [PROJECTOR SETUP] menu
→
[DATE AND TIME]
→
[ADJUST CLOCK]
f
The [PROJECTOR SETUP] menu
→
[DATA CLONING]
→
[LAN]
→
[WRITE PROTECT]
f
The [SECURITY] menu
→
[SECURITY PASSWORD]
f
The [SECURITY] menu
→
[MENU LOCK]
f
The [NETWORK/USB] menu
→
[WIRED LAN]
f
The [NETWORK/USB] menu
→
[WIRELESS LAN]
f
The [NETWORK/USB] menu
→
[PROJECTOR NAME]
f
Security password
f
Menu lock password
f
Control device password
f
Password set in “[Change password] page” (
x
page 175) of the web control screen
f
“[E-mail set up] page” (
x
page 171) in the web control screen
f
“[Authentication set up] page” (
x
page 172) in the web control screen
f
“[Crestron Connected(TM)] page” (
x
page 176) in the web control screen
r
Supported device
f
Commercially available USB memory is supported.
The USB memory with a security function is not supported.
f
Only the cards formatted in FAT16 or FAT32 can be used.
f
Only the single partition structure is supported.
Note
f
The data cloning function will not operate when the models of the projectors are different. For example, data of PT-MZ670 can be copied to
other PT-MZ670 projectors, but it can not be copied to PT-MW630. Data cloning is limited to the same model.
Copying the data to other projector via LAN
Make the following settings on the projector as the data copy destination in advance. For details, refer to “Setting
[WRITE PROTECT]” (
x
page 128).
