Chapter 5
Operations — Web control function
ENGLISH - 169
When [USER] (wireless LAN) is selected
9
10
11
8
12
11
13
12
14
15
12
14
11
15
15
16
14
17
15
16
14
11
17
12
12
12
1
2
3
4
5
6
7
8
1
[DHCP ON], [DHCP OFF]
To enable the DHCP client function, set [DHCP ON].
2 [IP ADDRESS]
Enter the IP address if the DHCP server is not used.
3 [SUBNET MASK]
Enter the subnet mask if the DHCP server is not used.
4 [DEFAULT GATEWAY]
Enter the default gateway address if the DHCP server is not
used.
5 [DNS1]
Enter the DNS1 server address.
Permissible characters for the entry of DNS1 server address
(primary):
Numbers (0 - 9), period (.)
6 [DNS2]
Enter the DNS2 server address.
Available characters for the entry of DNS2 server address
(secondary):
Numbers (0 - 9), period (.)
7 [SSID]
Enter the same string as the SSID registered to the access
point.
8
[Back], [Next]
Click the [Back] button to return to the previous screen. Click
the [Next] button to proceed to the next screen.
9 [AUTHENTICATION]
Select the user authentication method used in the network to
which the projector is connected.
10 [EAP]
Select the EAP set for the RADIUS server.
11 [ENCRYPTION]
Select the encryption method used for the communication
between the projector and the network.
12
[Back], [Next]
Click the [Back] button to return to the previous screen. Click
the [Next] button to display the screen to confirm the setting.
Click the [Submit] button to update the setting.
13 [KEY]
Set the key to be used with USER.
Enter 8 to 63 characters of ASCII character, or 64-digit
hexadecimal number.
14 [USER NAME]
Enter the user name to be used for authentication in single-byte
alphanumeric characters (excluding the space). (Maximum of
64 characters)
15 [PASSWORD]
Enter the password to be used for authentication in single-byte
alphanumeric characters. (Maximum of 64 characters)
16 [DIGITAL CERTIFICATE]
Registers the electronic certificate to be used for authentication
(file extension: PFX).
17 [CA CERTIFICATE]
Registers the CA certificate to be used for authentication (file
extension: CER).
Note
f
The content of setting varies depending on the authentication method of the wireless LAN to be connected.
