New Drive System for Optimal Lamp Performance
Lamps used in a projector require much higher precision than
ordinary household lamps. Panasonic employs a number of new
technologies—including a new drive system—that help main-
tain optimal lamp performance for longer-lasting brightness.
Daylight View 3 Technology: Enhanced Perception of
Brightness and Contrast
*
The PT-F100 series feature Panasonic’s
Daylight View 3 technology, which uses
an adaptive low-pass filter to
optimise the dark parts of the
image. This makes images seem
brighter and higher in contrast,
so they appear crisp, vivid and
easy to see even in brightly lit
rooms. Daylight View 3 also
includes a built-in ambient light
sensor that automatically detects
room brightness and adjusts
operation accordingly.
* There is no actual change in the rated brightness or contrast ratio.
Convenient features for fixed installation
Wide 2x Zoom and Horizontal/Vertical Lens Shift Give
You More Installation Flexibility
Each can project a 120-inch image from any distance between
3.6 m (11.8 feet) and 7.2 m (23.6 feet). In new installations,
this lets you accommodate a wide range of room sizes and
shapes. And when replacing existing projectors, the new 2x
zoom greatly expands your installation flexibility.
Wired LAN: Web Browser Control/Monitoring, E-Mail
Message Alert (PT-F100NTEA)
Anybody can operate the PT-F100NTEA by remote control or
monitor its status over a LAN network, because it is all done
using the computer’s familiar web browser. Furthermore, the
projector sends an e-mail message to notify the operator when
an error has occurred, or a lamp needs to be replaced.
PJLink
™
compatibility (PT-F100NTEA)
The LAN terminals support
PJLink
™
class 1 connection.
Control with the same specifica-
tions is also possible when used
in a multi-projector system with
projectors of another brand.
Direct Power Off
Because the cooling fan keeps operating until the lamp is
cooled, you can turn off the room’s main power without waiting
for the projector to cool down.
Easy Lamp Replacement from the Rear
For easier maintenance, you can replace the
lamp from the rear. The lamp is easily
replaced even after the projector is installed
on the ceiling.
Simulated image with Daylight View 3
turned on. The brightness and contrast
over the entire image appear to be
enhanced, and details in shadow areas
are reproduced clearly.
Simulated image with Daylight View 3
turned off. Overall contrast appears lower,
and images in dark areas are blackened.
Internet
LAN
LAN
PC
PC
PC
PC
PC
PT-F100NTEA
Remote Control
L A N
P
C
P
C
P
C
C
ompany
C
controller
C
ompany A
projector
C
ompany B
projector
PT-F100NTEA
7.2 m/23.6 feet
120-inch screen
3.6 m/11.8 feet
Ambient light
sensor (ALS)
Daylight View 3 Concept
Daylight View
circuit
LCD panels
Projector
2
