Chapter 4
Settings — [DISPLAY OPTION] menu
120 - ENGLISH
[DISPLAY OPTION] menu
On the menu screen, select [DISPLAY OPTION] from the main menu, and select an item from the sub-
menu.
Refer to “Navigating through the menu” (
x
page 88) for the operation of the menu screen.
[COLOR MATCHING]
Correct the color difference between projectors when using multiple projectors simultaneously.
Adjusting the color matching as desired
1) Press
as
to select [COLOR MATCHING].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
Color matching adjustment is not carried out.
[3COLORS]
Adjusts the three colors [RED], [GREEN], or [BLUE].
[7COLORS]
Adjusts the seven colors [RED], [GREEN], [BLUE], [CYAN], [MAGENTA], [YELLOW], or [WHITE].
[MEASURED]
Refer to “Adjusting the color matching using a colorimeter” (
x
page 121) for details about this mode.
3) Select [3COLORS] or [7COLORS].
4) Press the <ENTER> button.
f
The
[3COLORS]
or
[7COLORS]
screen is displayed.
5) Press
as
to select [RED], [GREEN], [BLUE], or [WHITE] ([RED], [GREEN], [BLUE], [CYAN],
[MAGENTA], [YELLOW], or [WHITE] when [7COLORS] is selected).
f
The adjustment condition can be reset by selecting [RESET]. For details regarding [RESET], refer to
“Resetting the adjustment condition of the color matching” (
x
page 121).
6) Press the <ENTER> button.
f
The
[3COLORS:RED]
,
[3COLORS:GREEN]
,
[3COLORS:BLUE]
, or
[3COLORS:WHITE]
screen is
displayed.
When [7COLORS] is selected, the
[7COLORS:RED]
,
[7COLORS:GREEN]
,
[7COLORS:BLUE]
,
[7COLORS:CYAN]
,
[7COLORS:MAGENTA]
,
[7COLORS:YELLOW]
, or
[7COLORS:WHITE]
screen is
displayed.
f
By setting [AUTO TESTPATTERN] to [ON], the test pattern for the selected color is displayed.
7) Press
as
to select [RED], [GREEN], or [BLUE].
f
Only [GAIN] can be adjusted when [WHITE] is selected for [3COLORS].
8) Press
qw
to adjust.
f
The adjustment value will change between 0
*1
and 2 048.
*1 The lower limit varies depending on the color to be adjusted.
Note
f
Operation when correcting the adjustment color
When the correction color same as the adjustment color is changed: The luminance of the adjustment color changes.
When correction color red is changed: Red is added to or subtracted from the adjustment color.
When correction color green is changed: Green is added to or subtracted from the adjustment color.
When correction color blue is changed: Blue is added to or subtracted from the adjustment color.
f
Since advanced skills are necessary for the adjustment, this adjustment should be carried out by a person who is familiar with the projector
or by a service person.
f
When [RESET] is set to [PICTURE MODE] and the <DEFAULT> button on the remote control is pressed, the selected adjustment item will
return to the value of factory default for the current picture mode.
f
When [RESET] is set to [NATIVE], pressing the <DEFAULT> button on the remote control will return the value to uncorrected value.
f
When [COLOR MATCHING] is set to other than [OFF], [COLOR TEMPERATURE] is fixed to [USER1].
