Chapter 4
Settings — [DISPLAY OPTION] menu
ENGLISH - 127
[DisplayPort IN]
Set this item in accordance with the image signal input to the <DisplayPort IN> terminal.
Setting [SIGNAL LEVEL] in [DisplayPort IN]
1) Press
as
to select [DisplayPort IN].
2) Press the <ENTER> button.
f
The
[DisplayPort IN]
screen is displayed.
3) Press
as
to select [SIGNAL LEVEL].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[AUTO]
Automatically sets the signal level.
[64-940]
Select this item when the signal output from the HDMI terminal of the external device (such as a Blu-
ray disc player) is input to the <DisplayPort IN> terminal using a conversion cable, etc.
[0-1023]
Select this item when the signal output from the DisplayPort terminal of the external device (such as a
computer) is input to the <DisplayPort IN> terminal.
Select this item also when the signal output from the HDMI terminal of a computer, etc. is input to the
<DisplayPort IN> terminal using a conversion cable, etc.
Note
f
The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the
external device regarding the output of the external device.
Setting [AUTO GAMMA SELECT] in [DisplayPort IN]
1) Press
as
to select [DisplayPort IN].
2) Press the <ENTER> button.
f
The
[DisplayPort IN]
screen is displayed.
3) Press
as
to select [AUTO GAMMA SELECT].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[ENABLE]
Select this item when the gamma mode is to be automatically set to the one compatible with
HDR (High Dynamic Range) based on the InfoFrame information added to the image signal. In
such case, the [PICTURE] menu
→
[GAMMA] is set to [HDR ST2084-500], [HDR ST2084-1000], or
[HDR HLG].
[DISABLE]
Select this item when the gamma mode is not to be automatically set and to specify the gamma mode
with the [PICTURE] menu
→
[GAMMA].
Note
f
Even if [AUTO GAMMA SELECT] is set to [ENABLE], when the information required for the HDR (High Dynamic Range) support is not
included in the InfoFrame information added to the displayed image signal, the gamma mode is not automatically set and follows the setting
in the [PICTURE] menu
→
[GAMMA].
Setting [AUTO COLOR SPACE SELECT] in [DisplayPort IN]
1) Press
as
to select [DisplayPort IN].
2) Press the <ENTER> button.
f
The
[DisplayPort IN]
screen is displayed.
3) Press
as
to select [AUTO COLOR SPACE SELECT].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
