Chapter 4
Settings — [PROJECTOR SETUP] menu
ENGLISH - 147
6) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[ALL]
Select this item when the ID number is not to be specified.
[1] - [255]
Select this item when the ID number is to be set.
Note
f
[LENS ID] will not return to the factory default setting even when initialized by any of the following methods.
g
When initialized by selecting the [PROJECTOR SETUP] menu
→
[INITIALIZE]
→
[FACTORY RESET]
g
When initialized by setting the [PROJECTOR SETUP] menu
→
[INITIALIZE]
→
[USER SETTINGS]
→
[OTHER USER SETTING] to
[INITIALIZE]
Setting name to the projection lens
A name for identifying individual projection lens can be written into the EEPROM built in the projection lens. Set
the name if required.
1) Press
as
to select [LENS].
2) Press the <ENTER> button.
f
The
[LENS]
screen is displayed.
3) Press
as
to select [LENS INFORMATION SETTING].
4) Press the <ENTER> button.
f
The
[LENS INFORMATION SETTING]
screen is displayed.
5) Press
as
to select [LENS NAME].
6) Press the <ENTER> button.
f
The
[LENS NAME INPUT]
screen is displayed.
7) Press
asqw
to select the character, and press the <ENTER> button to enter the character.
8) Press
asqw
to select [OK], and press the <ENTER> button.
f
Name of the projection lens is changed.
Note
f
Factory default name is [LENS01].
f
[LENS NAME] will not return to the factory default setting even when initialized by any of the following methods.
g
When initialized by selecting the [PROJECTOR SETUP] menu
→
[INITIALIZE]
→
[FACTORY RESET]
g
When initialized by setting the [PROJECTOR SETUP] menu
→
[INITIALIZE]
→
[USER SETTINGS]
→
[OTHER USER SETTING] to
[INITIALIZE]
[LENS MEMORY]
The adjusted lens position (vertical position, horizontal position, focus position, periphery focus position and zoom
position) can be saved and loaded.
Saving lens position
1) Press
as
to select [LENS].
2) Press the <ENTER> button.
f
The
[LENS]
screen is displayed.
3) Press
as
to select [LENS MEMORY].
4) Press the <ENTER> button.
f
The
[LENS MEMORY]
screen is displayed.
5) Press
as
to select [LENS MEMORY SAVE].
6) Press the <ENTER> button.
f
The
[LENS MEMORY SAVE]
screen is displayed.
