Chapter 3
Basic Operations — Switching on/off the projector
74 - ENGLISH
Setting the administrator account
Set the user name and password of the account with administrator rights.
1) Press
as
to select [USER NAME], and press the <ENTER> button.
f
The
[USER NAME]
screen is displayed.
f
The factory default setting of the user name for the administrator account is set to “dispadmin”.
2) Press
asqw
to select the text, and press the <ENTER> button to enter the text.
f
Up to 16 characters can be entered.
3)
After the user name is entered, press
asqw
to select [OK], and press the <ENTER> button.
f
The
[ADMINISTRATOR ACCOUNT]
screen is displayed.
4) Press
as
to select [PASSWORD], and press the <ENTER> button.
f
The
[PASSWORD]
screen is displayed.
5) Press
asqw
to select the text, and press the <ENTER> button to enter the text.
f
Up to 16 characters can be entered.
f
A password cannot be blank.
6)
After the password is entered, press
asqw
to select [OK], and press the <ENTER> button.
f
The
[ADMINISTRATOR ACCOUNT]
screen is displayed.
7) Press
as
to select [PASSWORD CONFIRM], and press the <ENTER> button.
f
The
[PASSWORD]
screen is displayed.
8) Enter the password entered in Step 5).
9)
After the password is entered, press
asqw
to select [OK], and press the <ENTER> button.
f
The
[ADMINISTRATOR ACCOUNT]
screen is displayed.
10)
Press
as
to select [STORE], and press the <ENTER> button.
f
The confirmation screen is displayed.
11) Press
qw
to select [OK], and press the <ENTER> button.
Note
f
For limitation of the character string that can be set as a password, refer to “[PASSWORD POLICY]” (
x
page 73).
f
Pressing the <MENU> button while the
[ADMINISTRATOR ACCOUNT]
screen is displayed enables to advance to the next operation
without setting the password of the administrator account but network function of the projector will not be able to be used. When using the
web control function or the communication control via LAN (including operation by application software), set a password.
f
When pressing the <MENU> button while the
[ADMINISTRATOR ACCOUNT]
screen is displayed, the
[ADMINISTRATOR ACCOUNT]
screen will not be displayed from the next time the projector is switched on. To use the network function, set a password in the [NETWORK]
menu
→
[ADMINISTRATOR ACCOUNT].
f
The user name and password of the administrator account can also be changed in “[Set up password] page (when accessed by
administrator account)” (
x
page 243) of the web control screen.
f
The user name and password of the standard user account without administrator rights can be set in “[Set up password] page (when
accessed by administrator account)” (
x
page 243) of the web control screen.
