Chapter 4
Settings — [MULTI DISPLAY] menu
ENGLISH - 183
[MULTI DISPLAY] menu
On the menu screen, select [MULTI DISPLAY] from the main menu, and select an item from the sub-menu.
Refer to “Navigating through the menu” (
x
page 88) for the operation of the menu screen.
Using the multi-display function
Four images can be displayed simultaneously by dividing the projection screen into four.
1) Press
as
to select [MULTI DISPLAY MODE].
2) Press the <ENTER> button.
f
The
[MULTI DISPLAY MODE]
screen is displayed.
3) Press
as
to select a function.
[OFF]
Does not use the multi-display function.
[USER1]
Displays four-screen display with the setting in “Setting the multi-display function” (
x
page 183).
[USER2]
[USER3]
4) Press the <ENTER> button.
Setting the multi-display function
The setting of the multi-display function can be saved to [USER1], [USER2], or [USER3].
1) Press
as
to select [MULTI DISPLAY MODE].
2) Press the <ENTER> button.
f
The
[MULTI DISPLAY MODE]
screen is displayed.
3) Press
as
to select the desired mode from [USER1], [USER2], and [USER3], and press the <ENTER>
button.
4) Press
as
to select [UPPER LEFT WINDOW], [UPPER RIGHT WINDOW], [LOWER LEFT WINDOW], or
[LOWER RIGHT WINDOW], and press the <ENTER> button.
f
The
[UPPER LEFT WINDOW]
screen, the
[UPPER RIGHT WINDOW]
screen, the
[LOWER LEFT
WINDOW]
screen, or the
[LOWER RIGHT WINDOW]
screen is displayed.
5) Press
as
to select the input terminal to be displayed in the window, and press the <ENTER> button.
f
The input terminal that can be selected varies depending on the structure of the optional Interface Board
installed in the slot.
6) Press
as
to select [FRAME LOCK].
7) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[UPPER LEFT WINDOW]
Sets the frame lock for the input signal set to the upper left window.
[UPPER RIGHT WINDOW]
Sets the frame lock for the input signal set to the upper right window.
[LOWER LEFT WINDOW]
Sets the frame lock for the input signal set to the lower left window.
[LOWER RIGHT WINDOW]
Sets the frame lock for the input signal set to the lower right window.
Note
f
The image currently displayed in the four dividing screen is not projected correctly when the following video signal is input.
g
Video signal with resolution exceeding 1 920 x 1 200 dots
g
Video signal with dot clock frequency exceeding 162 MHz
g
6G-SDI signal, 12G-SDI signal
f
Two input terminals of the Interface Board for DisplayPort 2 input (Model No.: ET-MDNDP10) cannot be selected simultaneously as the input
to be displayed in the four-screen display window. Only one of the input terminals can be selected.
f
The appearance may vary for each when an image from one input terminal is displayed on multiple screens.
f
The image adjustment values such as the [PICTURE] menu
→
[PICTURE MODE], [GAMMA], or [COLOR TEMPERATURE] that are set to
the upper left screen are applied to all screens.
f
The movement of the displayed image becomes discontinuous when [FRAME LOCK] is set for the still image signal.
f
The movement of the displayed image may become discontinuous for the images where [FRAME LOCK] is not set.
