Optical axis shift
Vertical: +50%, -16%(powered),
Horizontal: +30%, -10%(When using the ET-DLE085, +28%, -10
％)
Terminals
SDI IN
HDMI IN
DVI-D IN
RGB 1 IN
R, G, B
Y,
Y,C
P
B
, P
R
(Y, C
B
, C
R
)
Video
RGB 2 IN
R, G, B
Y, P
B
, P
R
(Y, C
B
, C
R
)
BNC × 1,
3G-SDI signal: SMPTE ST 424 compliant
HD-SDI signal: SMPTE ST 292 compliant
SD-SDI signal: SMPTE ST 259 compliant
HDMI 19-pin × 1, Deep Color, compatible with HDCP,
NOTE: Compatible with non-interlaced signals only.
DVI-D 24-pin x 1, DVI 1.0 compliant, compatible with HDCP,
for single link only
525i (480i), 625i (576i), 525p (480p), 625p (576p), 750 (720)/60p,
750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/25p,
1125 (1080)/24p, 1125 (1080)/24sF, 1125 (1080)/30p, 1125 (1080)/60p,
1125 (1080)/50p
VGA (640 x 480) - WUXGA (1920 x 1200)
compatible with non-interlaced signals only
NOTE: Compatible with non-interlaced signals only.
BNC × 5
R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic
NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Y:
Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms
1.0 Vp-p (including sync signal), P
B
/P
R
(C
B
/C
R
): 0.7 Vp-p, 75 ohms
1.0Vp-p, 75 ohms
D-sub HD 15-pin (female) × 1
R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic
NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Y: 1.0 Vp-p (including sync signal), P
B
/P
R
(C
B
/C
R
): 0.7 Vp-p, 75 ohms
525i (480i), 625i (576i), 525p (480p), 625p (576p), 750 (720)/60p,
750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/25p,
1125 (1080)/24p, 1125 (1080)/24sF, 1125 (1080)/30p, 1125 (1080)/60p,
1125 (1080)/50p
VGA (640 x 480) - WUXGA (1920 x 1200)
compatible with non-interlaced signals only
REMOTE 2 IN
D-sub 9-pin (female) x1 for external control (parallel)
SERIAL IN
SERIAL OUT
REMOTE 1 IN
REMOTE 1 OUT
D-sub 9-pin (female) × 1 for external control (RS-232C compliant)
D-sub 9-pin (male) x 1 for link control
M3 jack x 1 for wired remote control
M3 jack x 1 for link control (for wired remote control)
Installation
Ceiling/floor, front/rear, 360 degree free installation
Vertical
㸸
±40°*
5
/ Horizontal: ±15°*
6
(When using the optional upgrade kit ET-UK20
Vertical
㸸
±45°*
8/10
/ Horizontal
㸸
±40°*
9/10
)
Keystone correction range
LAN/DIGITAL LINK
RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control)
connection, 100Base-TX, compatible with Art-Net,
compliant with PJLink(TM)(Class 1)
PT-
RZ670B
/
RZ670W
/
RZ670LB
/
RZ670LW
DLP
TM
Projector
As of September 2014
3 / 1 8
SFD14M021
