Standard setting-up position (If using other than the ET-DLE030)
C a u t i o n :
• All construction work should be done by a qualified technician.
• When mounting to the ceiling, use the special mounting bracket. Furthermore, in order to prevent it from falling
down from the ceiling, use the supplied wire on the mounting bracket.
unit : mm (inch)
*1 When the lens protrudes to the maximum.
84 mm (3-5/16 in) with the ET-DLE085
43 mm (1-11/16 in) with the supplied lens
44 mm (1-23/32 in) with the ET-DLE150
27 mm (1-1/16 in) with the ET-DLE055
*2 Adjustable in 40 mm (1-9/16 in) steps.
NOTE:
Illustrations show the projector
installed using optional ceiling mount
bracket ET-PKD120H, optional bracket
assembly ET-PKD130B and an optional
lens.
This illustration is not drawn to scale.
45 mm (1-25/32 in) with the ET-DLE250
51mm (2 in) with the ET-DLE350
95
mm (3-3/4 in) with the ET-DLE450
463.5–543.5*
2
(18-1/4–21-13/32)
*
2
352–432
(13-27/32–17)
Projected image
294
244
(11-9/16)
(9-19/32)
ø60.5
*
1
EE
Lower edge of projected image
Upper edge of projected image
L
370
(14-9/16)
259
(10-3/16)
100
(3-15/16
)
100
(3-15/16)
PT-
RZ670B
/
RZ670W
/
RZ670LB
/
RZ670LW
DLP
TM
Projector
As of September 2014
6 / 1 8
SFD14M021
