Note
f
The PJLink password can also be changed on the [Set up password] page
(
x
page 137)
of the web control screen.
[PJLink CONTROL]
Set to enable or disable the PJLink protocol control function.
1) Press
as
to select [PJLink].
2) Press the <ENTER> button.
f
The
[PJLink]
screen is displayed.
3) Press
as
to select [PJLink CONTROL].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[ON]
Enables PJLink protocol control function.
[OFF]
Disables PJLink protocol control function.
[PJLink NOTIFICATION]
Set to enable or disable the PJLink notification function.
1) Press
as
to select [PJLink].
2) Press the <ENTER> button.
f
The
[PJLink]
screen is displayed.
3) Press
as
to select [PJLink NOTIFICATION].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
Disables the PJLink notification function.
[ON]
Enables the PJLink notification function.
f
If [ON] is selected, proceed to Step
5)
.
5) Press
as
to select [NOTIFIED IP ADDRESS 1] or [NOTIFIED IP ADDRESS 2], and press the <ENTER>
button.
f
The
[NOTIFIED IP ADDRESS 1]
screen or the
[NOTIFIED IP ADDRESS 2]
screen is displayed.
f
Enter the IP address of the computer to notify the status of the projector.
6)
After entering the IP address, press
asqw
to select [OK], and press the <ENTER> button.
[MEMORY VIEWER]
Set the operations of the Memory Viewer function.
Note
f
The [MEMORY VIEWER] menu can be operated and set only when MEMORY VIEWER input is selected.
f
For details on how to use the memory viewer function, please refer to “Projecting with MEMORY VIEWER input” (
x
page 115)
.
[SET SLIDE]
Start the slideshow. For details on the slideshow, see “Executing the slide” (
x
page 116)
.
[SLIDE TRANSITION EFFECT]
Sets the transition effects when switching the slides playback.
1) Press
as
to select [SLIDE TRANSITION EFFECT].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
ENGLISH
-
111
Chapter 4 Settings - [NETWORK] menu
