f
Depending on the item, each time you press the
qw
button, the individual adjustment screen with a bar
scale is displayed as shown below.
+5
CONTRAST
Note
f
Pressing the <MENU> button while the menu screen is displayed will return to the previous menu. You can operate in the same way by
pressing the <RETURN> button.
f
Some items may not be adjusted or used depending on the selected signals or input signals to the projector. The menu items that cannot be
adjusted or used are shown in gray characters, and they cannot be selected.
f
Some items can be adjusted even if signals are not input.
f
Individual adjustment screen disappears automatically if no operation is performed within approximately five seconds.
f
For menu items, refer to “Main menu”
(
x
page 66) and “Sub menu”
(
x
page 67)
.
Resetting adjustment values to the factory default
If the <DEFAULT> button on the remote control is pressed, the values adjusted in the menu items are restored to
the factory default settings.
button
1) Press the <DEFAULT> button on the remote control.
Note
f
You cannot reset all the settings to the factory default at a time.
f
To reset all the settings adjusted in the sub-menu item to the factory default at a time, execute the [PROJECTOR SETUP] menu →
[INITIALIZE ALL].
f
Some items cannot be reset by pressing the <DEFAULT> button on the remote control. Adjust these items individually.
Main menu
The main menu consists of the following seven menu items.
When a main menu item is selected, the cursor moves to its sub menu.
Main-menu item
Page
[PICTURE]
69
[POSITION]
74
[LANGUAGE]
81
[DISPLAY OPTION]
82
[PROJECTOR SETUP]
89
[SECURITY]
100
[NETWORK]
103
66 -
ENGLISH
Chapter 4 Settings - On-screen menu
