3) Press
as
to select [OSD SIZE].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[NORMAL]
Use this setting normally.
[DOUBLE]
The menu screen is displayed with the font size twice as much as set in [NORMAL]. The menu
screen size is doubled both vertically and horizontally.
Setting [WARNING MESSAGE]
Set the display/hide of the warning message.
1) Press
as
to select [ON-SCREEN DISPLAY].
2) Press the <ENTER> button.
f
The
[ON-SCREEN DISPLAY]
screen is displayed.
3) Press
as
to select [WARNING MESSAGE].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[ON]
Displays the warning message.
[OFF]
Hides the warning message.
Note
f
When [WARNING MESSAGE] is set to [OFF], the warning message will not be displayed on the projected image even if a warning status
such as “TEMPERATURE WARNING” is detected. The prompting message for filter replacement/maintenance will not be displayed either.
[HDMI SIGNAL LEVEL]
Switch the setting when the external equipment is connected to the <HDMI IN 1> terminal / <HDMI IN 2> terminal of the
projector and the image is not projected correctly.
1) Press
as
to select [HDMI SIGNAL LEVEL].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[AUTO]
Sets the signal level automatically.
[64-940]
Select when the HDMI terminal of an external device (such as a blu-ray player) is connected to the
<HDMI IN 1> terminal / <HDMI IN 2> terminal.
[0-1023]
Select when the DVI-D terminal output of an external device (such as a computer) is connected to the
<HDMI IN 1> terminal / <HDMI IN 2> terminal via a conversion cable or similar cable.
Select also when the HDMI terminal output of a computer or other device is connected to the <HDMI
IN 1> terminal / <HDMI IN 2> terminal.
Note
f
The optimal setting varies depending on the output setting of the connected external device. Refer to the operation instruction of the external
device regarding the output of the external device.
f
The displayed signal level is assumed when the input is 30 bits.
[DIGITAL LINK SIGNAL LEVEL]
(Not available for PT-VMZ51S and PT-VMZ41)
Switch the setting when the external equipment is connected to the <DIGITAL LINK/LAN> terminal of the projector and the
image is not projected correctly.
1) Press
as
to select [DIGITAL LINK SIGNAL LEVEL].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[AUTO]
Automatically sets the signal level.
[64-940]
Select when the HDMI terminal output of an external device (such as a Blu-ray disc player) is
connected to the <DIGITAL LINK/LAN> terminal via a twisted-pair-cable transmitter.
[0-1023]
Select when the DVI-D terminal output or HDMI terminal output of an external device (such as a
computer) is connected to the <DIGITAL LINK/LAN> terminal via a twisted-pair-cable transmitter.
ENGLISH
-
83
Chapter 4 Settings - [DISPLAY OPTION] menu
