Input menu
44
- ENGLISH
Settings
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
If the projector cannot reproduce proper video image,
select a specific broadcast signal format from among
[PAL], [SECAM], [NTSC], [NTSC 4.43], [PAL-M] and
[PAL-N].
Component
Auto
The projector automatically detects an incoming video
signal, and adjusts itself to optimize its performance.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image,
select a specific component video signal format
among [480i], [576i], [480p], [576p], [720p], [1035i]
and [1080i].
Press ▲▼ to select [System].
1 )
Press ► or the <SELECT> button to
2 )
access the submenu.
Press ▲▼ to select the desired system.
3 )
Note
\
z
When the [Input Search] function is set to [On1] or
[On2] in the Auto setup function, the input signal will
be searched automatically.
The AV System Menu cannot be selected when
z
selecting [RGB (Scart)].
Network
Press ▲▼to select [Network] and then
press the <SELECT> button.
Note
[Network] will be available in the [Input] menu when
z
the input source [Network] is selected.
For details please refer to “Operating Instructions-
z
Network operations”.
