[LAMP REMAIN TIME]
The lamp runtime has exceeded the prescribed cumulative time, and it is now time
to replace the lamp.
[LAMP STATUS]
The lamp has failed to light.
Wait a short while for the lamp to cool off, and then turn on the power.
[APERTURE (CONTRAST-SHUT-
TER)]
Trouble has occurred in the contrast shutter circuitry. Consult your dealer.
[AIR FILTER]
There is too much dust accumulated in the air filter unit. Turn off the projector and
unplug the power plug from the wall outlet, then replace the air filter unit.
[Network status] page
Click [Status] → [Network status].
The current network setting status is displayed.
2
1
1 [WIRELESS LAN]
Displays the configuration details of wireless LAN.
2 [WIRED LAN]
Displays the configuration details of wired LAN.
[Basic control] page
Click [Projector control] → [Basic control].
1
2
5
6
3
4
1 [INPUT]
Switches the input signal.
2 [VOLUME]
Adjusts the volume level.
3 [PICTURE MODE]
Switches the picture mode.
4 [AV MUTE]
Switches between AV mute on/off.
5 [POWER]
Turns on/off the power.
6 [CLOSED CAPTION]
Switches the closed caption mode.
Note
f
After selecting [NETWORK/USB] in [INPUT], it will select the previous input source. If you need to select the other, please
press the <MEMORY VIEWER> / <MIRRORING> / <Panasonic APP> button on the remote control.
f
When [NETWORK/USB] → [WIRELESS LAN] is set to [SIMPLE], [S-DIRECT] or [M-DIRECT], and the web control function
is enabled in the wireless LAN connection, if you switch the input to [MEMORY VIEWER] or [MIRRORING], the wireless
connection will be cut off and the web control function cannot be used any more.
ENGLISH
-
103
Chapter 4 Settings - [NETWORK/USB] menu
Chapter 4 Settings - [NETWORK/USB] menu