Serial terminal
The serial connector which is on the connector panel of the projector conforms to the RS-232C interface specification, so that
the projector can be controlled by a personal computer which is connected to this connector.
Connection
Connecting terminals on projector
D-Sub 9-pin (female)
Computer
Communication cable (straight)
D-Sub 9-pin (male)
Pin assignments and signal names
D-Sub 9-pin (female)
Outside view
Pin No.
Signal name
Contents
—
NC
TXD
Transmitted data
RXD
Received data
—
NC
GND
Earth
—
NC
CTS
Connected internally
RTS
—
NC
Communication conditions (Factory default)
Signal level
RS-232C-compliant
Sync. method
Asynchronous
Baud rate
9 600 bps
Parity
None
Character length
8 bits
Stop bit
1 bit
X parameter
None
S parameter
None
ENGLISH
-
137
Chapter 7 Appendix - Technical Information