About your projector
Remote control
This jack is not used for these
projector models.
1
2
3
5
6
7
8
9
4
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
27
28
26
29
1 Remote control signal emitters
2 Power on <
b
> button
Turn the projector on.
3 <AUTO SETUP/CANCEL> button
Automatically adjusts the image display position while
projecting the image. In addition, it acts as <CANCEL>
button when using the MEMORY VIEWER function.
(
x
page 49)
4 <MENU> button
Open or close the On-Screen Menu. (
x
page 56)
5 <ENTER> button/
asq
(VOL -)
w
(VOL+) buttons
Navigate the menu display.
Adjust the volume.
6 <DEFAULT> button
Resets the content of the sub-menu to the factory
default. (
x
page 57)
Or deletes one character when you enter an IP address
or a text.
7 <COMPUTER 2> button
Switches the COMPUTER2 signal to project.
8 <COMPUTER 1> button
Switches the COMPUTER1 signal to project.
9 <MIRRORING> button
Switches the MIRRORING signal to project.
(
x
page 51)
10 <MEMORY VIEWER> button
Switches the MEMORY VIEWER signal to project.
(
x
page 50)
11 <ID ALL> button
Used to simultaneously control all the projectors with one
remote control for a system using multiple projectors.
(
x
page 29)
12 <ID SET> button
Sets the ID number of the remote control to use for a
system using multiple projectors. (
x
page 29)
13 <D.ZOOM +/-> buttons
Zoom in and out the images. (
x
page 52)
14 <PAGE UP/PAGE DOWN> buttons
You can page up or page down files such as PowerPoint
through "Wireless Manager ME6.3". (
x
page 51)
15 <MUTE> button
Used to mute the audio.
(
x
page 54)
16 <P IN P> button (Only for PT-VW355N)
Operate the P IN P function. (
x
page 53)
17 <ON/OFF> switch
When using the remote control, set this switch to “ON”.
Set it to “OFF” to avoid misoperation when it is not in use.
18 Power standby <
v
> button
Turn the projector off.
19 Remote control indicator
Flashes if any button in the remote control is pressed.
20 <KEYSTONE> button
Correct keystone distortion. (
x
page 49)
21 <RETURN> button
Return to the previous menu or cancel the setting.
22 <FUNCTION> button
Assigns a frequently used operation as a shortcut button.
23 <HDMI> button
Switches the HDMI signal to project.
24 <Panasonic APP> button
Switches the Panasonic APPLICATION signal to project.
25 <VIDEO/S-VIDEO> button
Switches the VIDEO signal or S-VIDEO signal to project.
26 <FREEZE> button
Pauses the projected image and mute the audio
temporarily.
(
x
page 53)
27 Number buttons
Act as number buttons. Use these buttons when setting
the remote control codes or entering the password.
28
<P-TIMER> button
Operate the P-TIMER function. (
x
page 54)
29 <AV MUTE> button
Used to turn off the audio and video temporarily.
(
x
page 53)
ENGLISH
-
25
Chapter 1 Preparation - About your projector