[PICTURE] menu
On the menu screen, select [PICTURE] from the main menu, and select an item from the sub-menu.
Refer to "Navigating through the menu" (
x
page 56) for the operation of the menu screen.
f
After selecting the item, press
asqw
to set.
[PICTURE MODE]
You can switch to the desired picture mode suitable for the image source and the environment in which the projector is used.
1) Press
as
to select [PICTURE MODE].
2) Press
qw
or the <ENTER> button.
f
The [PICTURE MODE] individual adjustment screen is displayed.
3) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[STANDARD]
The picture becomes suitable for moving images in general.
[DYNAMIC]
The light output is maximized for use in bright areas.
[BLACKBOARD]
The picture becomes suitable for projecting on a black board.
[WHITE BOARD]
The picture becomes suitable for projecting on a white board.
[CINEMA]
*
1
The picture becomes suitable for movie sources.
[NATURAL]
*
2
The picture becomes suitable for use in low-light areas.
[EASY SETTING]
*
3
When executing the EASY SETTING function, it will be the optimal hue for the projected image
according to the projection environment.*
4
*1 Only for the movie-based signals.
*2 Only for the still image signals.
*3 When the projector leaves the factory, [EASY SETTING] does not appear. When execute the EASY SETTING function
by setting [COLORBOARD] to [ON] in [EASY SETTING], [EASY SETTING] is added to the items.
*4 If you use the projector in different environment, the screen may change. Please execute the EASY SETTING function
again by setting [COLORBOARD] to [ON] in [EASY SETTING].
[CONTRAST]
You can adjust the contrast of the colors.
1) Press
as
to select [CONTRAST].
2) Press
qw
or the <ENTER> button.
f
The [CONTRAST] individual adjustment screen is displayed.
3) Press
qw
to adjust the level.
Operation
Adjustment
Adjustment range
Press the
w
button. Brightens the screen and makes the color of image deeper.
-32 ~ +32
Press the
q
button. Darkens the screen and makes the color of image lighter.
Attention
f
Adjust [BRIGHTNESS] first when you need to adjust [BRIGHTNESS] and [CONTRAST].
60 -
ENGLISH
Chapter 4 Settings - [PICTURE] menu
