[WIRELESS LAN]
Set the connections of wireless LAN.
1) Press
as
to select [WIRELESS LAN].
2) Press
qw
to select the connection method.
[DISABLE]
When do not use the wireless LAN function.
[SIMPLE]
Direct connection mode that can be compatible with all OS (Windows / Mac / iOS /
Android etc.).
Use the wireless LAN function via the application software which supports
"Wireless Manager ME6.3", iPad / iPhone / iPod touch and Android devices.
Switch the input to [Panasonic APPLICATION], the idle screen will appear. You
can confirm the SSID and KEY. The factory default value of the KEY can be
changed. For details, refer to the following “Detailed setup of [SIMPLE]“.
[NORMAL]
[S-DIRECT]
Use this setting when use the wireless LAN function via the software "Wireless
Manager ME6.3" of the supplied CD-ROM which supports Windows and Mac
computer.
[M-DIRECT]
Use this setting when the projector is used as a simple access point.
Even if there is no access point, the connection is enabled. Select this setting
when use the wireless LAN function via the application software which supports
iPad / iPhone / iPod touch and Android devices.
For details, refer to the following "Detailed setup of [M-DIRECT]”.
[USER1] / [USER2] /
[USER3]
To match your network environment, set the detailed setup of network.
For details, refer to the following "Detailed setup of [USER1] / [USER2] /
[USER3]".
Note
f
Projectors that can be connected to [SIMPLE], [S-DIRECT] or [M-DIRECT] are up to 10.
f
When [WIRELESS LAN] is set to [SIMPLE], [S-DIRECT] or [M-DIRECT] and the input signal is other than [Panasonic
APPLICATION], the normal wireless connection is disabled.
f
Even if [WIRELESS LAN] is set to [SIMPLE], [S-DIRECT] or [M-DIRECT], when switch to input MIRRORING signal it will be
disabled.
f
For more information on how to use the application software "Wireless Manager ME6.3", refer to the operating instructions of
"Wireless Manager ME6.3".
f
It is possible to project the images which are stored in iPad / iPhone / iPod touch / Android and are sent to the projector by
using the dedicated application. For more information on how to use the application software, refer to the application guide
described in the following URL.
[iOS support site] http://panasonic.net/avc/projector/ios/
[Android support site] http://panasonic.net/avc/projector/android/
[WIRELESS DETAILED SETUP]
You can configure more precise network settings, if you select [SIMPLE], or select [M-DIRECT] or [USER1] ~ [USER3] (user)
in [NORMAL] for [WIRELESS LAN] in the network menu. For network settings, contact your network administrator.
Detailed setup of [SIMPLE]
Direct connection mode and compatible with all OS (Windows / Mac / iOS / Android etc.).
1) Press the <ENTER> button when [SIMPLE] is selected.
f
The [WIRELESS DETAILED SETUP] screen is displayed.
2) Press the <ENTER> button.
f
The [KEY] screen is displayed.
3) Press
asqw
to change the key according to the instructions.
[KEY]
Setting a key for the access point. Input either 8 to 15 alphanumerics.
4) Press
as
to select [OK], and press the <ENTER> button.
r
Default setting of [SIMPLE]
f
The following setting is set before the projector leaves the factory.
[KEY]
proj + The last 4 digits of the network ID
Detailed setup of [M-DIRECT]
Use this setting when the projector is used as a simple access point. Even if there is no access point, you can still connect the
projector to computer via the infrastructure.
ENGLISH
-
89
Chapter 4 Settings - [NETWORK/USB] menu