[OFF]
Performs no cinema processing.
[ON]
Performs cinema processing.
[NOISE REDUCTION]
(Only for VIDEO signal input)
You can reduce noises when the input image is degraded and noise is occurring in the image signal.
1) Press
as
to select [NOISE REDUCTION].
2) Press
qw
or the <ENTER> button.
f
The
[NOISE REDUCTION]
individual adjustment screen is displayed.
3) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
No correction.
[ON]
Reduces noises.
Attention
f
When this is set for an input signal with less noise, the image may look different from what it originally was. In such a case, set it to [OFF].
[TV-SYSTEM]
(Only for VIDEO signal input)
The projector will automatically detect the input signal, but you can set the color system manually when an
unstable signal is input. Set the color system matching the input signal.
1) Press
as
to select [TV-SYSTEM].
2) Press
qw
or the <ENTER> button.
f
The
[TV-SYSTEM]
individual adjustment screen is displayed.
3) Press
qw
to switch the item.
f
The items will switch each time you press the button.
f
Select among [AUTO], [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N], [PAL60] and [SECAM].
f
Set it to [AUTO] normally. (Setting [AUTO] will automatically select [NTSC], [NTSC4.43], [PAL], [PAL-M],
[PAL-N], [SECAM], or [PAL60].)
[RGB/YC
B
C
R
] / [RGB/YP
B
P
R
]
The projector will automatically detect the input signal, but you can set the system format manually when an
unstable signal is input. Set the system format matching the input signal.
1) Press
as
to select [RGB/YC
B
C
R
] or [RGB/YP
B
P
R
].
2) Press
qw
or the <ENTER> button.
f
The
[RGB/YC
B
C
R
]
or
[RGB/YP
B
P
R
]
individual adjustment screen is displayed.
3) Press
qw
to switch the item.
f
The items will switch each time you press the button.
f
Normally it is set to [AUTO]. If it cannot project properly with [AUTO], set it to [RGB], [YC
B
C
R
] or [YP
B
P
R
]
according to the input signal.
Terminal
System format
<COMPUTER 1 IN> terminal /
<COMPUTER 2 IN/1 OUT> terminal
480/60i, 576/50i, 480/60p, 576/50p
Select [AUTO], [RGB] or [YC
B
C
R
]
Other movie-based image signals
Select [AUTO], [RGB] or [YP
B
P
R
]
<HDMI 1 IN> terminal /
<HDMI 2 IN> terminal /
<DIGITAL LINK/LAN> terminal
480/60i, 576/50i, 480/60p, 576/50p
Select [AUTO], [RGB] or [YC
B
C
R
]
Other image signals
Select [AUTO], [RGB] or [YP
B
P
R
]
Note
f
For details of the image signals that can be used with the projector, refer to “List of compatible signals” (
Æ
page 169).
f
This may not operate properly for some connected external devices.
68 -
ENGLISH
Chapter 4 Settings - [PICTURE] menu
