Adjusting adjustable feet
By pressing the adjustable feet lock with your finger, the adjustable feet lock is released and becomes free. It will
be locked when you release the finger. Lift the front side of the projector while pressing the adjustable feet lock
with your finger, and release your finger until the projection position is aligned. If fine adjustment of the projection
position is necessary, adjust the adjustable feet by turning them. Turn the adjustable feet counterclockwise as
shown in the figure to extend them. Also, turning them clockwise will return to the original status.
Adjustable feet lock
Maximum adjustable range
Adjustable feet : 34 mm (1-11/32") each
Attention
f
Heated air is expelled from the air exhaust port. Do not touch the air exhaust port directly when adjusting the adjustable feet while using the
projector. (
x
page 28)
Note
f
When turning the adjustable feet clockwise until a click sound is heard, the adjustable feet change to its minimum length.
Adjusting the projection position with the optical axis shift function
This projector is equipped with vertical optical axis shift function. The projection position can be adjusted in the
range shown in the following figure with the optical axis shift function based on the position of the projected screen
in the home position (standard projection position).
When the projector is installed on the desk, the projected image will move upward if you turn the vertical lens shift
dial clockwise and will move downward if you turn it counterclockwise.
The following figure shows the adjustment range when the projector is installed on the desk.
PT-VZ585N
PT-VW545N
PT-VX615N
Projection screen width H
Standard projection position
Projection screen height V
0.44 V
Standard projection position
0.44 V
Projection screen width H
Projection screen height V
Projection screen width H
0.4 V
Projection screen height V
Standard projection position
Note
f
The standard projection position indicates the projection screen position in the state without vertical shift adjustment. At this time, the vertical
lens shift dial is fully turned counterclockwise.
54 -
ENGLISH
Chapter 3 Basic Operations - Projecting
