Panasonic PT47WX54 - 47" PROJECTION TV Operating Instructions Manual Download

Page: 10 / 112

PTIONAL

QUIPMENT

ONNECTIONS

ENGLISH

Optional Equipment Connections (cont.)

VCR and Cable Box Connection (Cont.)

Recording a premium (scrambled) cable channel

Procedure

•

Select ANT2 in the SET UP menu.

•

Press the

TV/VIDEO

button on the remote control to

select the video input (VIDEO 1, VIDEO 2, etc.)
connected to your VCR.

•

Turn the VCR ON.

•

Tune the VCR to Channel 3 or 4, depending on the
switch setting on the back of VCR.

•

Using your cable box, tune to the premium cable channel
you want to record.

•

Begin recording.

To view a different channel while recording:
•

Select ANT1 in the SET UP menu.

•

Press the

TV/VIDEO

button on the remote control to TV

mode.

•

Tune the television to a program (except another
premium cable channel).

Amplifier Connection (TO AUDIO AMP)

To listen through a separate stereo system, connect an
external audio amplifier TO AUDIO AMP outputs on back of
television.

Note:

TO AUDIO AMP terminals cannot be connected directly
to external speakers.

Audio Adjustments

•

Select SPEAKERS ON located in the onscreen AUDIO
menu.

•

Set amplifier volume to minimum.

•

Adjust television volume to desired level.

•

Adjust amplifier volume to match the television.

•

Select SPEAKERS OFF & VARIABLE AUDIO OUT from
AUDIO menu.

•

Volume, mute, bass, treble and balance are now
controlled through the television.

Note:

Select SPEAKERS OFF & FIXED AUDIO OUT to control
audio functions through the external amplifier.

Program Out Connection (PROG OUT)

To use the television audio and video with optional equipment,

connect the PROG OUT and TO AUDIO AMP connections on the

back of the television.

Note:

If the main picture signal is DVI or Component video
input, no Program Out function is available.

Procedure

•

Connect optional equipment to PROG OUT and TO
AUDIO AMP terminals. PROG OUT display is same as
onscreen display. See optional equipment manual for
further instructions for recording and monitoring.

Digital TV - Set-Top Box (DTV-STB) or DVD
Connection

This television is capable of displaying 1080i and 480p DTV

signals when connected to a DTV tuner set-top-box (STB). In

order to view DTV programming, the STB must be connected

to the component video inputs (Y,PB,PR) of the television. A

DTV signal must be available in your area. Select the output of

the STB to either 1080i or 480p.
This television also utilizes a progressive scan doubler, which

de-interlaces the NTSC signal and progressively scans the

image. This allows you to sit close to the TV and not see the

thin black horizontal lines (venetian blind effect) associated

with interlaced TV pictures.
Use this diagram to connect the DTV-STB or DVD player to

the back of your projection television.

Note:

There are two sets of three video iacks, Y, P

, and P

Separate component color inputs provide luminance and
color separation. Use the L (left) and R (right) audio
inputs.

Front Control Panel

The front control panel can be used to access menus and
switch video mode when the remote control is not available.

A second VCR, Camcorder, a video disc player, video game
equipment or DSS equipment can also be connected to the
video inputs. See the optional equipment manual for details

Procedure

•

Connect equipment to front Audio/Video input jacks.

•

Press TV/VIDEO button to select VIDEO 4 input mode.

•

Operate optional equipment as instructed in equipment
manual.

CABLES NOT SUPPLIED

90.7 MHZ

EXTERNAL AMPLIFIER

S-VIDEO

COMPONENT
VIDEO INPUT