34
Index Search
Press
SEARCH/ M/A SKIP*
to display SEARCH
in Stop or Play mode.
Press NUMBER
keys
to select recording
number.
• To calculate number,
see below.
2
Note
Press FF or REW
to start search.
• If Index Search is started very close to an
index mark, that index mark may not be
counted in the search.
1
3
Tape Operation
(continued)
Search System
For each recording, an invisible index mark is placed on the tape.
A program index and information is also included for timer recordings.
These marks are used to access or scan recordings.
Press SEARCH/ M/A SKIP
twice to display SEARCH
in Stop or Play mode.
1
Program End Search
Press FF
to start
PROGRAM
END SEARCH.
2
Fig. 1
Fig. 2
Fig. 3
Notes
Locates end point of recording for continuity.
Examples of Program End Search.
If search exceeds
a few seconds in
BLANK area.
-->search continues 7 sec. past end point,
-->tape rewinds to 10 sec. before end point,
-->tape plays to end point and stops.
Upon locating end point,
• If Program End Search is started very close to
an index mark, that mark may be skipped over.
• To cancel, press PLAY or STOP.
SEARCH
INDEX PROG. END MOVIE
SEARCH START :FF
NEXT :SEARCH M/A SK I P
EXIT :STOP
Program 2 or BLANK
Program 1
the current tape position
Press SEARCH button
FF
INDEX
End Point
Program 2
Program 1
the current tape position
Press SEARCH button
INDEX
INDEX
BLANK
BLANK
FF
End Point
Program 2
Program 1
the current tape position
Press SEARCH button
BLANK
INDEX
FF
End Point
SEARCH
INDEX PROG. END MOVIE
ENTER INDEX NUMBER :1
USING 1- 9 KEYS
FORWARD SEARCH :FF
REVERSE SEARCH :REW
NEXT :SEARCH M/A SK I P
EXIT :STOP
INDEX SEARCH 3
INDEX SEARCH
FORWARD SEARCH : FF
REVERSE SEARCH : REW
• Play begins at
end of search. To
search forward or
back 1 index,
press FF or REW
while screen left
is displayed
(10 sec.).
To Calculate Index Number
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
Example 2:
To go to rec. 6 from rec. 2, enter 4 and press FF.
NOTE: indicates start points of each recording.
6
1
5
7
2
3
4
1
7
5
3
4
6
2
