1.3 Outputting Inspection Images to External Device
When outputting through Ethernet to a PC, "Image Receiver for PV" needs to be installed in the PC which receives
images. You can download the Image Receiver from our web site.
http://panasonic.net/id/pidsx/e
(“Products” > “Machine Vision System” > “PV200” > “Software”)
Downloading the software requires a user information registration.
Selecting Destination
Outputting to a SD memory card
A folder named as date and time (YYMMDDHHMMSS= year, month, day, hour, minute, second) is created in the
following path of a SD memory card and image files are saved in it.
（
100 files can be saved in per folder
）
¥Panasonic-ID SUNX Vision¥PV-T30¥image¥Output¥
1.
Select “SDcard” from the selectmenu [Environment Setting]-[Input/Output]-[Image Output]
-[Destination].
2.
Select "No. of Folders”.
Initially, decide the number of folders to save images.
The default is “10” and the range of available value is “1 to 1000”.
3.
Set "Overwrite".
[No] (Default):
Terminates image saving.
[Yes]:
Deletes the oldest folder and all images stored in the folder and creates a new folder to continue
saving when the number of folders reaches the limit or the space of a SD memory card is used up.
Outputting through Ethernet interface
1.
Select “Ethernet” from the selectmenu [Environment Setting]-[Input/Output]-[Image Output]
-[Destination].
2.
Set [ERR signal ON at Output Error].
To turn on the ERROR signal when an error occurs, select “Yes”. (Default: No)
3.
Set [Forced Outage at Output Error].
[No] (Default):
Continues the inspection.
[Yes]:
Terminates the inspection. Confirm the connection following the displayed message. When
outputting Synchronously, images can be resent.
When the PC has an error, such as uninvoked Image Receiver and disconnection of cables, images cannot be
output correctly. Set the operation of PVT30 in such case in step 2-3. When "Output Conditions" is set to
"Command Reception", two items described above cannot be selected. In this case, if outputting an image
failed, ERROR signal will be output.
