6.2.8. Stopper Angle, Capstan Rotor
Unit, Oil Seal, Capstan Stator
C.B.A., and MR Head
Fig. J6-1
6.2.8.1. Reassembly Notes
1. Application of Silicon Grease
CAUTION:
When installing the IC2501 (AN3845SC) or Capstan
Stator
C.B.A.,
be
sure
to
apply
Silicon
Grease
(VFK1301) as shown. Be careful not to touch other parts
with greased portion to prevent grease depletion.
Fig. J6-2
2. Installation of Capstan Rotor Unit and Oil Seal
a. Install the 2 Oil Seals into the Capstan Holder Unit.
Then, insert the Capstan Rotor Unit Shaft into the hole
of the Capstan Holder Unit so that shaft passes through
2 Oil Seals. Be careful not to scratch the Shaft or
Capstan Holder Unit.
b. Align the bottom of Oil Seal (A) with notch line (A). Align
the top of Oil Seal (B) with notch line (B).
Fig. J6-3
34
PVQ-1310 / PV-C1320 / PV-C1330W / VV-1300 / VV-1310W / PV-C1340 / PV-C1350W / PV-C2010 / PV-C2020 / PV-C2030W / VV-2000 / PV-C2060