Operation
11
You can amplify the bass in the music or videos you are playing back and enjoy a powerful experience by
directly transferring the vibrations to the headphones themselves.
While playing back music or videos on a device connected via Bluetooth
®
Press [BASS
i
] or [BASS
j
] to adjust the Bass reactor strength level.
• This unit vibrates along with the bass of the music or video being played back.
• Bass reactor strength level: Off
,-.
Low
,-.
Middle
,-.
High (The default value is Low.)
• Even when the power is turned off, the setting before turning it off will be stored to memory.
• The playback time depends on the music source and the Bass reactor strength level.
Note
• This may not be effective depending on the music or video being played back.
• If you feel ill while using the Bass reactor, set the Bass reactor to Off.
• Turn on this unit to use the Bass reactor when using this unit with the detachable cord (supplied) connected.
You can enjoy music with enhanced bass.
Slide [BASS] switch to ON.
∫
To turn off the bass enhancer function
When [BASS] switch is slided to OFF, the bass enhancer function will turn off.
Note
• This may not be effective depending on the music or video being played back.
[RB-M500B]
Bass reactor
[RB-M300B]
Enhancing the bass (Bass enhancer)
