17
(2) Insert hand with
fingers extended.
(1) Lift up.
4. Adjust the length of the legrest when the backs of your
calves or knees are not resting in the legrest wells.
5. Open the lift-up portion of the armrest and insert your hand and forearm.
Pull the legrest slide lever
to adjust the length of the
legrest. (See Page 13)
CAUTION
• Remove hard objects, such as false fingernails, wristwatches or rings, when massaging hands or
arms. Failure to do so may result in injury.
Hand/Arm Position
Insert hand all the way inside.
Position the forearm and hand
at the center of the armrest.
Note: Raise backrest if difficulty is experienced when positioning hand and forearm.
16
Raised
approximately 55
°
.
Reclined
approximately 11
°
.
neck / back
roller position
Sit as far back in the seat as possible with
your head on the pillow.
Body scanning lasts for
approximately 30 seconds.
Correct Massage Position
• If the massage lounger is reclined further than this
angle, it will not automatically return to the correct
massage position.
Too High
Correct Position
Too Low
A soft tapping action begins to
determine your shoulder position.
2. Press one of the flashing buttons ( , , , or ) to select a program.
3. Confirm the shoulder position has been correctly determined according to the
position where the soft tapping is carried out.
The massage will commence after the body scanning has been completed.
• Air massage of the lower body and hands and arms commences simultaneously with the soft tapping.
• Leg stretch and back vibration functions are also in operation.
Automatic adjustment of the angle of the legrest may also occur.
• The body scanning will commence when the
program is selected. (See Page 36)
• The body height range that can be properly
detected by the body scanning is between
approximately 4.6 and 6.1 ft. (140 and 185 cm).
• The unit will automatically recline
to the correct massage position.
When the shoulder position is incorrect…
Adjust the position so
that the underside of
the massage heads is
lightly touching the
tops of your shoulders.
Adjust the position of the massage
heads, while the soft tapping is in
progress, using the Roller Position
button to move the massage heads
up or down.
A single press of the button will raise or
lower the massage heads approximately
0.5 in. (1.2 cm).
The legrest adjusts to four angles so that the soles of the
feet touch the footrest wells according to a rough estimate
of occupant height based on the shoulder position.
