Panasonic RP-BT10-W, Operating Instructions Manual

RQT8993

22

23

RQT8993

Listening to music on your cellphone

Operating the receiver

Once the pairing is set, the music play functions of your 
cellphone can be operated by remote control 

 .

(Same as for iPod

®

: page 16)

Notes: 

•  Some cellphones may cancel the pairing when 

playback is stopped on the cellphone side while 

listening to music.

•  For further details on the operations after receiving 

a call while listening to music, refer to the operating 
instructions of your cellphone.

Winding up an operation session

Disconnect the Bluetooth connection using your cellphone.

Note: 

•   For further details on disconnecting the 

Bluetooth

 connection, refer to the 

operating instructions of your cellphone.

  Press and hold the MIC button of the receiver for 6 seconds.

 The receiver’s power is turned off, and its lamp (red) goes off.

List of lamp displays

Receiver

Lamp

Device status

Remarks

Lights (purple)

Now charging

Off

Charging completed

Lights alternately blue and red.

Low battery charge

Under operation

Off

While power is off

Blinks slowly (red)

While power is on (no pairing)

Power turns off after 3 minutes.

Blinks rapidly (red)

When pairing is being set (*1)

Blinks slowly (blue)

When pairing is set successfully

Blinks slowly (blue)

When an incoming call is received

Blinks slowly (blue)

While talking

*1  If the device that is trying to be connected cannot be found, the lamp blinks rapidly for a maximum of 60 seconds 

or so, after which it blinks slowly again.

Transmitter

Lamp

Device status

Remarks

Off

While power is off

Blinks slowly (red)

While power is on (no pairing)

Power turns off after 3 minutes.

Blinks rapidly (red)

When pairing is being set (*1)

Blinks slowly (blue)

When pairing is set successfully

*1  If the device that is trying to be connected cannot be found, the lamp blinks rapidly for a maximum of 60 seconds 

or so, after which it blinks slowly again.

xxxxxxx

ㄦ

MIC